China leading analytical testing vials manufacturers and suppliers,welcome to wholesale polypropylene housing ghp membrane lower hold-up volume. Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 um
Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs. Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either
13 mm Acrodisc Syringe Filters Ideal sample volume ≤ 10 mL Available with a range of membrane chemistries and pore sizes to ensure the best compatibility with your sample and application requirements Minispike version features a unique small outlet tip allowing for easier handling and a reduced hold-up volume, ≤ 14 μL Shop Now 13 mm Syringe Filters
Acrodisc® Syringe Filters with PTFE Membrane - Pall Corporation The Acrodisc® syringe filter featuring a 0.2 µm PTFE membrane, prevents air bubble locks when filling sample vials. Purchase online - syringe filters with a filtration area of 1.0 cm², hold-up volume less than 14 µL and a 13 mm minispike outlet.
Aug 29, 2019 · Below is a table for the hold up volume for different syringe filters. Membrane Description Hold Up volume Cellulose Acetate (CA), 0.2μm 150 μL (28 mm) Cellulose Acetate (CA), 0.45μ
Aug 16, 2017 · in Syringe Lab Filters 1 offer from $13.99 Biomed Scientific Syringe Filters PTFE 13mm Diameter 0.45um Pore Size Non Sterile Pack of 10 2 offers from $8.99 LabZhang 24pcs Syringe Filter,Syringe Lab Filters,Hydrophilic Nylon Membrane 25mm Diameter 0.22um Pore Size,Non Sterile Filtration,Green (nylon-25mm 0.22um) 78 1 offer from $9.54
Acrodisc® Syringe Filter with HT Tuffryn® Membrane, Pall Laboratory. Suitable for filter sterilizing dilute biological fluids. Low hold-up volume. Less sample loss. Modified acrylic housing. Low hold-up volume minimizes sample loss. Filters 28142-340, 28144-040, and 28144-007 are sterilized by gamma irradiation and individually packaged.
In addition, to verify low levels of UV-detectable extractables, samples of the syringe filters are evaluated prior to release. Acrodisc PSF Syringe Filters feature a large effective filtration area (3.9 cm 2) for increased sample throughput, ideal for sample volumes of ≤ 150 mL. Pall Acrodisc PSF Syringe Filters are designed to be fully
Acrodisc® Syringe Filter with HT Tuffryn® Membrane, Pall Laboratory. Suitable for filter sterilizing dilute biological fluids. Low hold-up volume. Less sample loss. Modified acrylic housing. Low hold-up volume minimizes sample loss. Filters 28142-340, 28144-040, and 28144-007 are sterilized by gamma irradiation and individually packaged.
Hold-up-volume. The volume of liquid retained in a filter or housing (can be expressed with or without air purge). FAQ.
The fluid remaining inside the filter is typically referred to as the “hold-up volume.” The hold-up volume for 25 mm syringe filters can be in excess of 1 mL and can make filtration of samples smaller than 2 mL very difficult, if not impossible, to filter. There are three ways to reduce the hold-up volume in a syringe filter. 1. Use a 13 mm
Syringe Filters. Pall supplies a comprehensive family of syringe filters offering a full range of sizes, volumes, and flow rates. Sterile syringe filters are typically used in life science applications to sterilize solutions or for clarification. Non-sterile syringe filters are used across a range of filtration and sample preparation applications. They are widely used in analytical chemistry for sample preparation, protecting analytical equipment from particle contamination.
33 mm Millex® filters. Sample volume: ≤100 mL. Features: Larger filter surface (almost 20% more surface area than 25 mm filters) for increased flow rates and throughput. Samplicity® filtration system with Millex® Samplicity® Filters. Sample volume: 300 µL – 2 mL. Features: Prepares multiple samples simultaneously; ergonomic design simplifies membrane filtration; vacuum-powered device improves throughput and sample recovery.
luer lock ghp acrodisc-Analytical Testing Vials. Pall Life Sciences® 4560 Acrodisc® Syringe Filters 25mm with GHP Membrane, 0.45 µm. Pore size of 0.45 µm with typical hold-up volume of \100µl. Made with GHP (hydrophilic polypropylene) membrane for low protein binding.
The Acrodisc Minispike Syringe Filter, GHP employs cutting-edge separation technology to ensure accurate pore size ratings for improved chromatography as well as instrument and column protection. It also provides consistent analytical results (lot-to-lot) and low extractable components for minimal chromatographic interference.