PVDF Membrane 0.2 pm: 140 pm (5.5 mils) 0.45 pm: 127 pm (5.0 mils) Nylaflo Membrane 0.2 and 0.45 um: 127 um (5.0 mils) Ordering Information Maximum Operating Temperature 55 OC (131 OF) PDF, TF (PTFE), and Nylaflo Membranes 100 OC (212 OF) Minimum Bubble Point — Water Membrane 0.2 urn: 2.9 bar (290 kPa, 42 psi)
GH Polypro membrane is the best choice for filtering mobile phases Maximum Operating Temperature (Metric) 55 C ... Maximum Operating Temperature. wwPTFE Membrane ...
Membrane: Polyethersulfone Support layers: Polypropylene Structure: Polypropylene All components are thermally bonded to ensure integrity and to reduce extractables. Effective Filtration Area 6.8ft2 ± 0.3ft2 / 0.63m2 ± 0.0279m2 per 10" (250mm) cartridge Maximum Differential Pressure/ Temperature Forward: 80psid (5.5bar) @ 75ºF (24ºC)
Pall GH Polypro (GHP) Membrane Disc Filters, Pall Life Sciences 66557, Pack of 100 ON SALE . Pall Laboratory Filters, Filters, Syringe filters. +1-800-504-7309 Contact Check Order Status
Hydrophilic polypropylene; Pore Size. 0.2 and 0.45 µm; Typical Thickness. 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow RatemL/min/cm 2 at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20; 0.45 µm: 31; Maximum Operating Temperature. 55 °C (131 °F) Minimum Bubble Point - IPA. 0.2 µm: 1 bar (100 kPa, 14.5 psi) 0.45 µm: 0
wwPTFE Membrane Disc Filters - wwPTFE Membrane Disc Filters wwPTFE Membrane Disc Filters - Mobile Phase Filtration It appears that your browser has JavaScript disabled.
Pall Life Sciences GH Polypro (GHP) Membrane Disc Filters, Model 60189, Pack of 100-All-purpose, universal hydrophilic polypropylene membrane with max
Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Performance GH Polypro (GHP) Membrane is Virtually a Universal Membrane for All Applications Membrane Proteinaceous General Aqueous Non-Aggressive Organic Aggressive Organic GHP ++ ++ ++ ++ PTFE
Max Continuous Service Temperature. This is the maximum acceptable temperature above which mechanical properties (tensile strength, impact strength) or electrical properties (dielectric strength, linked to insulation properties) of a plastic part are significantly degrading, over the reasonable life time of the tested product.
GH Polypro membrane is the best choice for filtering mobile phases Maximum Operating Temperature GHP Membrane: 55 ºC (131 ºF) ... membrane 100/pkg NA 0 66548 0 ...
Maximum operating temperature (°C) 50 . recovery and reuse of hi gh added-value compounds and the re duction of water consumption. In ... (45 °C, 55 °C, 65 °C) and membrane materials ...
Membrane Filters - GH Polypro Disc, Pall Gelman. SKU. 12-4611. Add to Wish List. Email to a friend. Maximum operating temperature 55°C (131°F). More Information
GH Polypro (GHP) Membrane Disc Filters - SeparationsGH Polypro (GHP) Membrane Disc Filters. All purpose, universal membrane with maximum chemical compatibility for both aqueous so
Article Snippet: Supernatants were filtered through 0.2 µm GH Polypro (GHP) filter plates (Acro PrepTM, Pall Corporation, Ann Arbor, MI, USA) and stored at −20 °C until analysis by LC-MS/MS.
Operating temperature effects on the plasticization of . The optimum operating conditions for this membrane are 4.5 bar and 25°C. Under these conditions, the selectivities of N2/CH4, CO2/CH4, O2/N2 and N2/CO2, were 3.65, 155.7, 28.4 and 49.6, respectively.