sterile ghp syringe filter maximum operating pressure 2.1 bar

Whatman Syringe Filters Syringe Filters

Whatman® 25 mm GD/X syringe filters are sterile. Pall Acrodisc Syringe Filters 13mm maximum operating pressures: 6.9bar (100psi).

Syringe Filters - Pall Shop

Non-sterile syringe filters are used across a range of filtration and sample preparation applications. They are widely used in analytical chemistry for sample 

Acrodisc® Syringe Filters for Analytical Sample Preparation

Acrodisc syringe filter housings will not rupture at their rated operating pressures. The maximum operating pressure listed in the product literature is 

RAISE YOUR SAMPLE FILTRATION STANDARDS - Aijiren

Certified cleanliness: Aijiren Captiva Premium syringe filters are >0.9 bar. >3.2 bar. >2.0 bar. Burst pressure before stabilization. >6.0 bar. >6.0 bar.

HPLC and Chromatography Sample Prep - VWR

Acrodisc PSF GxF syringe filters with glass/GHP membrane Maximum Operating Pressure. 13 mm: 6.3 bar ... 2.1 bar (210 kPa, 30 psi) at 55 ºC. (131 ºF).

www.pall.com/lab

Pall's GHP media is a “universal” membrane that can be Acrodisc syringe filters with Supor® membrane, sterile ... 2.1 bar (210 kPa, 30 psi) at 60 °C.

STERILE SYRINGE FILTER Technical Data Sheet

These filters are designed for applications where sterility of the affluent is mandatory Maximum Working Pressure: 5.5 bar (80 Psi) @ 25 oC (77 oF).

Acrodisc® Syringe Filters With Universal Membranes - GxF/0.2 µm

Glass Fiber / GH Polypro membrane (GHP, hydrophilic polypropylene) Maximum Operating Pressure (bar). 4.1 bar. Maximum Operating Temperature (Metric).

Pall Supor® EKV Sterilizing Grade Filters - G.Eitan

2.1 bar (30 psi) at 60 °C Pre-sterilized Mini Kleenpak syringe filters must not be re-sterilized ... Maximum Operating Pressure. 4.1 bar (60 psi) at 40 ...

Filters and Filtration products - 7222 Pallflex Air - IndiaMART

4614 Acrodisc Syringe Filters with Supor Membrane Sterile 15 psi) Hold-Up Volume <125 µL Housings Polypropylene Maximum Operating Pressure 2.1 bar Max.

PTFE and PVDF Hydrophilic Syringe Filter - Membrane Solutions

Hydrophilic Syringe Filter by Membrane Solutions LLC Maximum Operating Pressure(bar). 6. Pre-filtration(μm) ... NY PVDF PTFE CA PES MCE PP S: Sterile.

Sterile Acrodisc® Syringe Filters

Maximum Operating Pressure. 5.4 bar (540 kPa, 80 psi) at ambient temperature. Typical Water Flow Rate. mL/min at 2.1 bar (210 kPa, 30 psi). PN 4905: 130.

Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 um

Inlet/Outlet Connections: Female luer lok inlet, male slip luer outlet; Maximum Operating Pressure: 2.1 bar; Maximum Operating Temperature: 55°C.

High Quality Specialty Syringe Filters | I.W. Tremont

Housing Polypropylene; Connector Inlet/Outlet: 7~13 mm stepped hose barb connection; Filtration Area, ft² ≥0.021; Maximum Operating Pressure Forward: 3.5 bar @ 

HPLC and Chromatography Sample Prep - Obrnuta faza

Acrodisc PSF GxF syringe filters with glass/GHP membrane maximum filtrate recovery from limited sample volumes. ... high operating pressures.