solvent compatibility ghp filters maximum operating pressure 2.1 bar

GH Polypro (GHP) Membrane Disc Filters - Separations

GH Polypro (GHP) Membrane Disc Filters All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min

“Red Alert” Filters - Graco

serious injury, do not exceed the 300 psi (2.1 MPa, 21 bar) maximum working pressure of this filter, or the maximum working pressure of any other acces-sory or component in your system. Be sure that all components and accessories are rated to with-stand the maximum working pressure of your pump. Fig. 2 B D 9 A

Purasol SN/SP Solvent Purifiers - Entegris

Broad chemical compatibility Most organic photochemical Maximum operating conditions Maximum inlet pressure: 0.34 MPa (3.4 bar, 50 psi) @ 25°C (77°F) ...

Pall 4558 Acrodisc Syringe Filters with GHP Membrane Pack of

Pall 4558 Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 µm, Diameter 25 mm, Pack of 1000: Industrial & Scientific. Automation Certified to ensure smooth operation and worry-free performance 24 hours a day in automated workstations.

Aijiren ZORBAX Rapid Resolution High Definition SB-C18

† ZORBAX SB-C18 is compatible with water and all common organic solvents. † Avoid use of columns below pH 0.8 or above pH 8.0. † Maximum operating pressure is bar (17,000 psi). Optimal lifetime is achieved when operating up to 1000 bar. † Maximum operating temperature is 90 °C at low pH only. Retention time, (min) 0.2 0.4 0.6 0.8

Acrodisc® PSF Syringe Filters

AP-4364 GHP 0.2 µm < 125 µL 55 °C (131 °F) at 2.1 bar 4.1 bar (410 kPa, 60 psi) 215 mL/min at 2.1 bar AP-4564 (210 kPa, 30 psi) at 21-24 °C (70-75 °F) (210 kPa, 30 psi) AP-4566 AP-4357 GHP 0.45 µm < 125 µL 55 °C (131 °F) at 2.1 bar 4.1 bar (410 kPa, 60 psi) 300 mL/min at 2.1 bar

Vent Filters

Maximum Operating 4.1 bar (410 kPa, 60 psi) 5.2 bar (520 kPa, 75 psi) 4.1 bar (410 kPa, 60 psi) Pressure at ambient temperature at ambient temperature at ambient temperature Recommended Minimum Bubble Point (Methanol): N/A Minimum Bubble Point Integrity Test 0.9 bar (90 kPa, 13 psi) [60% IPA/40% Water (v:v)]: Minimum Water Breakthrough: 0.8 bar

Acrodisc Syringe Filters Chemical Compatibility Guide | High

30 Acrodisc PSF (25 mm Syringe Filter) Product Specifications Typical Hold-Up Maximum Maximum Typical Part Pore Volume Operating Operating Water Number Description Size (w/air purge) Temperature Pressure Flow Rate AP-4305 GxF/GHP 0.2 µm < 200 µL 55 °C (131 °F) at 2.1 bar 4.1 bar (410 kPa, 60 psi) 175 mL/min at 2.1 bar AP-4307 (210 kPa, 30

MICROCONTAMINATION CONTROL Fluorogard All-PTFE High

Operating conditions Maximum operating pressure 0.58 MPa (5.8 bar, 84 psi Fluorogard ATX 20” Cartridge Filters 50 40 30 20 10 7 6 5 4 3 2 1 12 60

Atlantis Premier BEH C18 AX Columns

This will result in higher operating pressure and poorer performance. d. Pressure 2.1 mm I. D. Atlantis Premier BEH C 18 AX 1.7 µm and 2.5 µm columns can tolerate operating pressures up to 18000 psi (1241 bar or 124 MPa). The 4.6 mm i.d. columns containing 2.5 µm and 5 µm particles can tolerate pressures up to 10,000 psi (700 bar or 70 MPa).

[ Care and Use ManUal ] - Aijiren Technology Corporation

e. Operating Conditions 1. Shipping Solvent: BioSuite C 18 3 μm PA-A Column: 60% Acetonitrile (CH 3CN)/40% H20 BioSuite C 18 3.5 μm PA-B Column: 50% CH 3CN/50% H20 2. Pressure: BioSuite Peptide Analysis Columns can tolerate pressures of up to 6,000 psi (400 bar or 40 Mpa) although

Acrodisc PSF Syringe Filters - Medigene Sdn. Bhd.

AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar AP-4306 (210 kPa, 30 psi) (210 kPa, 30 psi) AP-4557 GxF/GHP 0.45 µm < 200 µL 55 °C (131 °F) at 4.1 bar (410 kPa, 60 psi) 195 mL/min

Pall Acrodisc Filters - vgdusa.com

Flow rate: 78mL/min at 2.1 bar. 1.66. $229.17. 4907. Acrodisc Sterile Syringe Filter with 0.2um Fluorodyne II Membrane Membrane is hydrophilic polyvinylidene fluoride. For scale up. Polypropylene. Bacterial retention tested. Integrity testable. Filtration area: 2.8cm2. Female Luer-Lok inlet/male slip luer outlet. Flow rate: 130mL/min at 2.1 bar

PALL Acrodisc Syringe Filters with PTFE - DIGIPRINT SUPPLIES

Typical liquid flow rate: 510ml/min at 1 bar(15psi) Maximum Operating Temperature: 100 °C (212 °F) at 2,1 bar(30psi) Maximum Operating Pressure: 4,1 bar(60psi) at 21 - 24°C (70 -75°F) Use: Air, liquid; Solvent resistant: Yes; UV resistant: No

Ultradyne PTFE Filter - meissner.com

Ultradyne® Filter Cartridge The Ultradyne® filter cartridge is an absolute rated, pleated PTFE membrane cartridge which offers the greatest assurance of filtration performance and chemical compatibility in severe process conditions. Available in absolute retention ratings of 0.05 μm, 0.1 μm, 0.2 μm, 0.4 μm, 1.0 μm and 5.0 μm,