pore size 0.45um ghp membrane filter aggressive organic solvent-based solutions Syringe Filter, PVDF 25MM 0.45µm – AGPLUS Research Pte Ltd Description Syringe filter diam.33 mm FLL/MLS PP Transparent membr.PVDF 0.45 µm Membrane diameter (mm) 25 Weight (g) 2.96 Membrane m
Aijiren Disposable syringe filter devices are designed to provide fast and efficient filtration of aqueous and organic solutions. 0.45μm Pore Size Membrane is usually used for pretreatment to reduce the microbial load and filter out most bacteria and microorganisms; conventional sample and mobile phase filtration can meet general chromatographic requirements;
The 25 mm Acrodisc is recommended for sample volumes from 5 to 00 mL. The 3 mm size is recommended for samples under 0 mL in volume. The 4 mm size is for samples under 2 mL. PP housing with Luer fittings. GHP - hydrophilic PP membrane suitable for both aqueous and organic samples. GXF - multi-layered glass fiber prefilter.
GHP Acrodisc™ has a hydrophilic polypropylene membrane. Will handle both aqueous as well as aggressive organic solvent-based solutions. Available with glass fiber (GF) prefilter for particle laden samples (EF8436C). Nylon Acrodisc™ has a 25 mm HPLC certified nonpyrogenic nylon membrane for analyzing aqueous samples. Non-autoclavable.
Sample filtration using syringe filters containing 0.45 μm (HPLC) or 0.2 μm (UHPLC) pore size membranes will also extend the life of chromatography columns by preventing particulate from blocking the flow path between the column packing. PVDF syringe filters offer excellent chemical compatibility, including aggressive acids and alcohols.
Pall Life Sciences Polypropylene Membrane Filters are versatile, and can be used in aqueous and aggressive organic solvent-based solutions. The low protein binding membrane gives high recovery of critical proteinaceous samples. Helps to provide accurate analysis. HPLC certified for low levels of UV-absorbing extractables.
PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
Nanosep centrifugal devices with wwPTFE (water wettable PTFE) membranes are available with 0.2 and 0.45 μm pore sizes can be used in rapid microfiltration applications. They are ideal for use in analytical sample preparation or applications that require the use of a universally solvent compatible membrane.
Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm. PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
micro pall ghp aggressive organic solvent-based solutions Advances in Organic Solvent Nanofiltration Rely on Physical Oct 23, 2018 The vast majority of industrial chemical synthesis occurs in organic solution.
Avoid the expense and inconvenience of keeping a variety of filters on hand. Versatile filter for aqueous and aggressive organic solvent-based solutions. Low protein binding membrane gives high recovery of critical proteinaceous samples. Accurate analysis. HPLC certified for low levels of UV-absorbing extractables.
They are hydrophilic membranes for both aqueous and non-aggressive solvent-based mobile phase. The GH Polypro Polypropylene Membranes have a versatile filter COVER PAGE - OECD Existing Chemicals Database. Except of the stock solution, no chemical analysis was performed during the test. filters (0.45 um pore size), which were then rinsed with
Nylon filters are naturally hydrophilic and no wetting agents are used in manufacture. With an extractable level <0.0015 mg/cm2, they are ideal for HPLC solvent and sample preparation. Because of high non-specific binding, they are not recommended for protein solutions. Compatible with aqueous and most organic solvents.
It also gives the ability to filter aggressive chemicals, including acids and non-aqueous solvents, such as those used in GC and HPLC. Autoclavable. Sample volume size: 0.2 to 5.0L; Inlet/Outlet: Stepped hose barb accepts 0.25 to 0.375in. (6 to 9mm) ID tubing; 0.2 and 0.45um pore sizes; Autoclavable ; Polypropylene housing
pore size 0.45um ghp membrane filter aggressive organic solvent-based solutions Syringe Filter, PVDF 25MM 0.45µm – AGPLUS Research Pte Ltd Description Syringe filter diam.33 mm FLL/MLS PP Transparent membr.PVDF 0.45 µm Membrane diameter (mm) 25 Weight (g) 2.96 Membrane m 25mm 0.45um PES Syringe Filter for Filtration Trading