Acrodisc Syringe Filter with Versapor Membrane 0.45um pore size. 25mm diameter. For cell cultures and other biological applications. Luer-Lok design. Large-pore Versapor acrylic copolymer membrane. Max 75psi. 88[degree]C maximum. Nonpyrogenic. Individually wrapped. Nonsterile. 75/pk 300/cs. $1,151.53. Pall Filter 4496
Part No. Descriptions. Qty/pk. S13NY-022. Nylon syringe filter 13mm 0.22um, yellow. 100. S13NY-045. Nylon syringe filter 13mm 0.45um, white. 100
Filter Media - Hydrophilic polypropylene . Pore Size - 0.2 and 0.45 μm . Typical Thickness - 0.2 μm: 101 μm (4.0 mils) - 0.45 μm: 114 μm (4.5 mils) Typical Water Flow RatemL/min/cm2 at 0.7 bar (70 kPa, 10 psi) - 0.2 μm: 20 - 0.45 μm: 31 . Maximum Operating Temperature - 55 °C (131 °F) Minimum Bubble Point - Water - 0.2 μm: 2.9 bar
Syringe Filter, 25 um Membrane Dia., 0.45 um Pore Size, PTFE Filter Material Item # 4YMY5 Mfr. Model # 6784-2504 UNSPSC # 235806 Get Price Whatman® regenerated cellulose membrane filters RC 55, pore
Acrodisc Syringe Filter with Versapor Membrane 0.45um pore size. 25mm diameter. For cell cultures and other biological applications. Luer-Lok design. Large-pore Versapor acrylic copolymer membrane. Max 75psi. 88[degree]C maximum. Nonpyrogenic. Individually wrapped. Nonsterile. 75/pk 300/cs. 1.45. $1,001.33 4496
Product Specifications: Wettability: Hydrophilic: Maximum operating temperature: 90 Degrees C: Burst Pressure (PSI) 87: Pore Sizes Available: 0.10um, 0.22um, 0.45um
Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) GF/0.45µm is 6.3 bar (90 psi) Typical Water Flow Rate (mL/min at 2.1 bar (30psi)) 0.2µm, 25mm is 60 0.45µm, 25mm is 65 0.45µm, 25mm GF is 60: Typical Water Flow Rate (mL/min at 0.7 bar (10psi)) 0.2µm, 13mm is 17 0.45µm, 13mm is 28
Whatman GD/X syringe filters PTFE membrane, pore size 0.45um PTFE membrane, pore size 0.45 μm, diam. 25 mm, non-sterile, pkg of 150 ea. Pricing and availability is not currently a
*AQ™ syringe filters are color coded for membrane type and pore size. 13mm filters are chosen when sample volume is low and maximum recovery is important. These smaller filters have a small surface area and therefore requires more pressure to filter through compared to 25mm devices of the same pore size and membrane type. Each pack is
Pall 25MM ACRODISC 0.45UM wwPTFE 1000/PK. “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521
PALL AP-4560 Acrodisc PSF Syringe Filter with GHP Membrane, 0.45 µm Pore Size, 25 mm Diameter, 50/Package, 200/Case 55°C Maximum Operating Temperature At 2.1 Bar
0.2 µm: 20 0.45 µm: 31 Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance that the filter will not add artifacts to
Nylon Syringe Filters, 0.45um, 13mm, AQ™ Pharma Grade. 1,000/CS; Description; Specifications; Filter Housing Diameter: 13mm: Membrane Type: Nylon-66 0.45µm
Pore Size: 0.45 µm: Air Flow Rate: 4 L/min x cm²: Bubble Point at 23 °C: ≥1.55 bar, air with water: Gravimetric Extractables: 0.5%: Porosity % 70%: Water Flow Rate >2.6 mL/min x cm²
Maximum operating temperature: 130 Degrees C: PTFE Membrane Filters, 0.45 um, 8 inch x 10 inch, Nonsterile, 20 per pack, SPEC17048 ... Pore Size . 0.45um . Clear ...