Whatman 10406970, Sterile Mixed Cellulose Ester Filter, ME Range (ME 24), 3.1 mm white/black grid, 0.2 um pore size, 47 mm circle (100 pcs) Regular Price $50.07 Price $43.48. Add to Cart. Add to Wish List. Whatman Nuclepore Hydrophilic Membrane, 0.2 µm Pore Size, 47 mm Circle, 100 Pack, 10417012.
Cytiva’s Whatman regenerated cellulose membrane filters are microporous cellulose acetate filters made without wetting agents. RC60 offers low extractables and wide compatibility in both organic and aqueous media. Regenerated Cellulose Membrane (RC58), 0.2 µm pore size, 47 mm circle (100 pcs) Spontaneous wetting with very good wet strength
GH Polypro (GHP) Membrane Disc Filters All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min/cm 2 at 0.7 bar
Acrodisc® syringe filters GHP membrane, diam. 25 mm, pore size 0.45 μm; find -Z259845 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Pore size: 0.2um. Filtration area: 3.9cm2. Hold-up volume: \<125uL. 3. $705.33. AP-4566. Acrodisc 25mm Premium Syringe Filter Polypropylene housing. GHP hydrophilic polypropylene membrane for maximum chemical compatibility fast flow rates low protein binding and low levels of UV-absorbing extractables. Pore size: 0.2um. Filtration area: 3.9cm2.
Absolute pore size ratings typically refer to the largest pore size of a membrane and it is expected that all pores will be equal to or smaller than the absolute rating. For the polycarbonate track-etch (PCTE) and polyester track-etch (PETE) membrane filters, porosity is the percent of the total surface area occupied by the pores; it typically
Membrane: Pore Size: 0.2 μm: For Use With (Application) Filtering cryoprotectants such as DMSO, aqueous biological solutions, alcoholic solutions, and nonaqueous/HPLC/GC solvent applications: Housing Material: Polypropylene (Housing) Type: Syringe Filter: Diameter (Metric) 25 mm
Sample filtration using syringe filters containing 0.45 μm (HPLC) or 0.2 μm (UHPLC) pore size membranes will also extend the life of chromatography columns by preventing particulate from blocking the flow path between the column packing.
of the hydrophobic characteristics of PTFE membrane filters and their ability to stop aqueous aerosols. Pore sizes of 0.2 µm and 0.5 µm are typically used. Sterile venting of vacuum manifolds, fermentation vessels, and filtrate tanks and containers utilize PTFE 0.2 µm membranes.
The narrow housing of these filters minimizes hold-up volume and enables use with ampules, test tubes, and other small vessels. Filters are available with either 0.2 µm hydrophilic mixed cellulose ester (MCE) fibers for use with aqueous solutions, or 0.2 µm hydrophobic polypropylene (PP) fibers for use with organic solvents and alcohols.
GH Polypro (GHP) Membrane Disc Filters Hydrophilic polypropylene membrane with maximum chemical compatibility when filtering both aqueous solutions and aggressive solvents. High recovery of critical proteinaceous samples due to low protein binding. HPLC certified. 50mm diameter. Pore size: 0.2um.
Fluoropore™ membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing in.FHUP in. are unlaminated, or produced without a backing.) Our Omnipore™ membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.
Absolute pore size ratings typically refer to the largest pore size of a membrane and it is expected that all pores will be equal to or smaller than the absolute rating. For the polycarbonate track-etch (PCTE) and polyester track-etch (PETE) membrane filters, porosity is the percent of the total surface area occupied by the pores; it typically
nitrate, (NY) nylon (500 mL size only) or (PES) polyethersulfone membranes. Pores sizes of 0.2 or 0.45 µm are available for CA and CN membranes. NY and PES are available only in 0.2 µm pore size. Filters are color-coded by membrane type for fast and easy identification. Prefilters are included.
Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.