polypropylene housing ghp membrane maximum operating pressure 2.1 bar

Acrodisc® Units with Mustang® E Membrane - Endotoxin Removal

Filter Media: Mustang E membrane; Housing: Polypropylene; Pore Size. 0.2 μm; Inlet/Outlet Connections. Female luer lock inlet, male slip luer outlet; Membrane Bed Volume. 0.12 mL; Maximum Operating Temperature and Pressure. 2.1 bar (210 kPa, 30 psi) at 60 °C (140 °F) or 5.5 bar (550 kPa, 80 psi) at 21 - 24 °C (70 - 75 °F) Typical

Acro® 50 Vent Devices with PTFE Membrane

Housing: Polypropylene Filter Diameter 50 mm Effective Filtration Area 19.6 cm2 Typical Air Flow Rates 0.2 µm: 8 Lpm at 0.2 bar (20 kPa, 3 psi) 0.45 µm: 12 Lpm at 0.2 bar (20 kPa, 3 psi) 1 µm: 15 Lpm at 0.2 bar (20 kPa, 3 psi) Maximum Operating Temperature 130 °C (266 °F) at 1.0 bar (100 kPa, 15 psi) Maximum Operating Pressure

BPS Capsule Filters

Maximum Operating Parameters Liquid Operational Pressure 80 psi (5.5 bar) at 20 °C (68 °F) Gases Operational Pressure 60 psi (4.1 bar) at 20 °C (68 °F) Operating Temperature 43 °C (110 °F) at 30 psi (2.1 bar) in water Forward Differential Pressure 50 psid (3.4 bard) at 20 °C (68 °F) Reverse Differential Pressure 40 psid (2.7 bard) at 20

Protec ter 1 - Meissner

Maximum Operating Pressure & Temperature, Liquids Maximum Operating Pressure & Temperature, Gas 75 psig @ 32°F to 100°F 50 psig @ 32°F to 100°F (5,2 bar @ 0°C to 38°C) (3,4 bar @ 0°C to 38°C) 45 psig @ 140°F 30 psig @ 140°F (3,1 bar @ 60°C) (2,1 bar @ 60°C) UltraCap® H.D. Model

AcroPak™ 300 Capsule with PTFE Membrane

Housing Diameter With Vent: 6.7 cm (2.6 in.) Housing Diameter Without Vent: 5.3 cm (2.1 in.) Inlet/Outlet Connections Stepped hose barbs 6.4 - 12.7 mm (1/4 - 1/2 in.) diameter Typical Hold-Up Volume < 6 mL Maximum Operating Temperature 60 °C (140 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 4.1 bar (410 kPa, 60 psi) at ambient

Pall 4433 DMSO-Safe Syringe Filter Nylon Membrane, 25mm

Housing: Polypropylene; Sterilization: Sterilized by ethylene oxide and individually packaged; Maximum Operating Temperature: 55 °C (131 °F) Maximum Operating Pressure: 6.2 bar (620 kPa, 90 psi) Typical Water Flow Rate: 60 mL/min at 2.1 bar (210 kPa, 30 psi) Typical Hold-Up Volume (with air purge): < 50 Μl

Acrodisc wwPTFE Syringe Filters | Pall- MG - MG Scientific

Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) GF/0.45µm is 6.3 bar (90 psi) Typical Water Flow Rate (mL/min at 2.1 bar (30psi)) 0.2µm, 25mm is 60 0.45µm, 25mm is 65 0.45µm, 25mm GF is 60: Typical Water Flow Rate (mL/min at 0.7 bar (10psi)) 0.2µm, 13mm is 17 0.45µm, 13mm is 28

Acrodisc® Syringe Filters With Universal Membranes - GxF/0.2

3.9 cm² Filter Media Glass Fiber / GH Polypro membrane (GHP, hydrophilic polypropylene) Hold-Up Volume <200 µL Housing Material Polypropylene Maximum Operating Pressure (bar) 4.1 bar Maximum Operating Temperature (Metric) 55 °C Typical Flow Rate 175 mL/min at 2.1 bar (210 kPa, 30 psi) Overview Description Type Use

Mustang E Membrane - STEMart

Specification. Membrane: Highly cross-linked quaternized amine Mustang E membrane. Material of Housing: Polypropylene. Pore Size: 0.2 μm. Inlet/Outlet Connections: Female luer lock inlet, male slip luer outlet. Membrane Bed Volume: 0.12 mL. Maximum Operating Temperature and Pressure: 2.1 bar at 60 °C or 5.5 bar at 21 - 24 °C.

Acrodisc® PSF Syringe Filters

typical hold-up maximum maximum typical part pore volume operating operating water number description size (w/air purge) temperature pressure flow rate ap-4305 gxf/ghp 0.2 µm < 200 µl 55 °c (131 °f) at 2.1 bar 4.1 bar (410 kpa, 60 psi) 175 ml/min at 2.1 bar ap-4307 (210 kpa, 30 psi) at 21-24 °c (70-75 °f) (210 kpa, 30 psi) ap-4306 ap-4557

Supply Hydrophilic PVDF Membrane Pleated Filters, PVDF Filter

Maximum Operating Temperature: 100℃(212℉) Max. Differential Pressure: 4.8 bar at 20℃(70 psi at 68℉) 2.1 bar at 100℃(30 psi at 212℉) Maximum reverse pressure: 40 psid @ 70°F (2.8 bar @ 21°C) Recommended Change Out Differential Pressure: 2.4 bar (35 psid) Sterilization Temperature Time

PureFlo® Polypropylene Membrane Filter Capsules

Maximum Operating Pressure: Liquid: 5.5 bar (80psi) at 77°F/25°C Gas: 4.1 bar (60psi) at 77°F/25°C Minimum Burst Pressure: 8.3 bar (120psi) at 77°F/25°C Maximum Forward Di˛erential Pressure: 4.21 bar (60psi) at 68°F/20°C Maximum Reverse Di˛erential Pressure: 2.1 bar (30psi) at 68°F/20°C Maximum Operating Temperature: PP & Gamma PP

Supply Hydrophilic PTFE Membrane Pleated Filters, PTFE Filter

Maximum Operating Temperature: 90℃(194℉) Max. Differential Pressure: 4.8 bar at 20℃(70 psi at 68℉) 2.1 bar at 90℃(30 psi at 194℉) Recommended Change Out Differential Pressure: 2.4 bar (35 psid) Sterilization Temperature Time: 121˚C (250˚F) for 30 minutes at 1.0 bar (14 psi), multiple cycles

amcPTFECap--American Membrane Corporation

Maximum Operating Temperature 60 °C at 30 psi (2.1 bar) Sterilization 121 °C for multiple cycles at 15 psi (1.0 bar) Maximum Operating Pressure: 60 psi (4.1 bar) at ambient temperature : Minimum Bubble Point: 0.1 μm: 21 psi (1.5 bar) in ethanol 0.2 μm: 15 psi (1.1 bar) in ethano : Typical Water Flow Rate (after ethanol prewet) 0.1 μm:

Pall 4501 Acrodisc Syringe Filters with PTFE Membrane, 25 mm

Housing Material: Polypropylene; Maximum Operating Pressure (bar): 2.1 bar; Maximum Operating Temperature (Metric): 100 °C; Pore Size (Removal Rating): 0.45 µm; Typical Flow Rate: 510 mL/min at 1.0 bar (100 kPa, 15 psi)