Filter Media: Mustang E membrane; Housing: Polypropylene; Pore Size. 0.2 μm; Inlet/Outlet Connections. Female luer lock inlet, male slip luer outlet; Membrane Bed Volume. 0.12 mL; Maximum Operating Temperature and Pressure. 2.1 bar (210 kPa, 30 psi) at 60 °C (140 °F) or 5.5 bar (550 kPa, 80 psi) at 21 - 24 °C (70 - 75 °F) Typical
filtration, separation, and purification products and GHP membrane also has an extremely low autofluorescence 2.1 bar (210 kPa, 30 psi) at 60 °C. Get Price Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 um
Medical / Pharmaceutical. Polypropylene housings provide a low cost alternative to PTFE and PVDF housings. Since the housings are constructed entirely out of polypropylene they are suitable for a wide range of applications for both liquids and gases. Each housing is available with two drain options; Manual Twist Drain or No Drain.
Visit One News Page for The Roots news and videos from around the world, aggregated from leading sources including newswires, newspapers and broadcast media.
A therapeutic foam for the treatment of, inter alia, varicose veins comprises a sclerosing solution foamed with a physiological gas such as carbon dioxide, oxygen or a mixture thereof.
Natural Organic Matter Removal and Fouling in a Low Pressure . Jan 08, 2014 · The NOM rejection and membrane fouling were performed on commercial polypropylene hollow fiber MF (Zena Membranes, Czechoslovakia) and ZW-10 model UF membranes (Zenon Environmental Inc., Canada) (Figure 1).
The 13 mm size is recommended for samples under 10 mL in volume. The 4 mm size is for samples under 2 mL. PP housing with Luer fittings. GHP - hydrophilic PP membrane suitable for both aqueous and organic samples; GXF - multi-layered glass fiber prefilter; Nylon - general-purpose filter, not for acids and halogenated solvents
Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs. Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either
PolyPropylene Filter Housing. PolyPropylene filter Housings are generally used in corrosive/saline liquid processing.Most of the water and waste water treatment plants and continues process industries. It is highly economical in price, light weight, durable and compact design.Considering the varied needs and applications of the end users, our
DMSO-Safe Acrodisc® Syringe Filter - pall.com. Housing: Polypropylene Effective Filtration Area 2.8 cm2 Inlet/Outlet Connections Female luer lock inlet, male slip luer outlet Typical Hold-Up Volume (with air purge) . 50 µL Maximum Operating Temperature 55 °C (131 °F) Maximum Operating Pressure 6.2 bar (620 kPa, 90 psi) Typical Water Flow Rate 60 mL/min at 2.1 bar (210 kPa, 30 psi
ZHUHAI, China, June 16, 2022 /PRNewswire/ -- China's first modern liberal arts college, Beijing Normal University-Hong Kong Baptist University United International College (UIC),
Acrodisc Syringe Filters with GHP Membrane (GHP, hydrophilic polypropylene) 55 C (131 F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 mm: 6.3
The 13 mm size is recommended for samples under 10 mL in volume. The 4 mm size is for samples under 2 mL. PP housing with Luer fittings. GHP - hydrophilic PP membrane suitable for both aqueous and organic samples; GXF - multi-layered glass fiber prefilter; Nylon - general-purpose filter, not for acids and halogenated solvents
HPLC Mobile Phase Filtration Membranes - Pall. Filter Media GH Polypro (GHP, hydrophilic polypropylene), TF (PTFE, hydrophobic polytetrafluoroethylene), PVDF (hydrophilic polyvinylidene fluoride), and Nylaflo™ (hydrophilic nylon) membranes Pore Size 0.2 and 0.45 µm Typical Thickness GHP Membrane 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) TF (PTFE) Membrane 0.2 µm: 139 µm
mL/min/cm 2 at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20 0.45 µm: 31 Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical