micro ghp syringe filter maximum operating temperature 55 C Nylon Syringe Filters, Sterlitech, 0.45 Micron, 25mm, 100/Pk – 14 The maximum recommended operating temperature for the syringe filters when used with compatible fluids is 60°C.
The GxF Acrodisc PSF syringe filter has a serial glass fiber pre - filter to allow for maximum throughput and faster flow rates than standard glass fiber prefilter devices. The multi-layered prefilter traps particulate rated from > 40 to 1 µm. Figure 2 The Acrodisc PSF Syringe Filter Figure 3 Comparison of Syringe Filters Automation
Pall AP-4560 Acrodisc PSF Syringe Filters with GHP Membrane, Pore Size 0.45 µm, Maximum Operating Temperature: 55 °C; Maximum Operating Pressure: 4.1 bar;
Syringe Filters - Ciro Manufacturing Corporation 13, 17, 25 & 31mm: Female luer lock inlet, male slip luer outlet Typical Hold-Up Volume (with air purge) 13 mm: 15 μL 17mm : 18 μL 25 mm: 80 μL 25 mm Prefilter: 80 μL 31 mm: 80 μL Maximum Operating Temperature 55 °C (131 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 mm: 6
Acrodisc® 13 mm syringe filters featuring a hydrophilic polyvinylidene fluoride (PVDF) minispike outlet. Buy these syringe filters online. They have a hold-up volume less than 14 µL with 55 °C as the maximum operating temperature.
Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) GF/0.45µm is 6.3 bar (90 psi) Typical Water Flow Rate (mL/min at 2.1 bar (30psi)) 0.2µm, 25mm is 60 0.45µm, 25mm is 65 0.45µm, 25mm GF is 60: Typical Water Flow Rate (mL/min at 0.7 bar (10psi)) 0.2µm, 13mm is 17 0.45µm, 13mm is 28
28139-550CS 894.3 USD. 28139-550 28139-548 28143-264. Acrodisc® Syringe Filters with GHP Membrane, Pall Laboratory. Filters Syringe Filters. Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs.
Sample filtration using syringe filters containing 0.45 μm (HPLC) or 0.2 μm (UHPLC) pore size membranes will also extend the life of chromatography columns by preventing particulate from blocking the flow path between the column packing. Nylon syringe filters can be used for both aqueous and solvent-based sample filtration applications and
Pall Acrodisc Syringe Filter with HT Tuffryn Membrane, Pall . Ideal for filter sterilizing biological fluids, serum, tissue culture media, and media additives. Low hold-up volume minimizes sample loss. HT Tuffryn (polysulfone) membrane is extremely low protein-binding. Maximum operating temperature: 55°C (131°F).
Jan 26, 2022 · Pall GH Polypro (GHP) Membrane Disc Filters, Pall Life Sciences is a reliable and dependable addition to the Pall Filters family of products. Combining top-notch and uncompromising quality with an affordable price, the Pall GH Polypro (GHP) Membrane Disc Filters, Pall Life Sciences 66340/ 28143-014 can fulfill your laboratory
"These syringe filters offer a choice of filter media: hydrophobic PTFE membrane for exceptional chemical and temperature compatibility -hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without prewetting -GHP (hydrophilic polypropylene) membrane for low protein binding -and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous
Acrodisc® Syringe Filters with GHP Membrane Maximum Operating Temperature. 25 mm PSF: 55 ºC (131 ºF) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure ...
Pall Laboratory. These syringe filters offer a choice of filter media: hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without pre-wetting; GHP (hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for. Compare this item.
Pall's GHP media is a “universal” membrane that can be Acrodisc syringe filters with Supor® membrane, sterile 2.1 bar (210 kPa, 30 psi) at 60 °C. Get Price KynarPure ® -D PVDF Cartridge Filter - Membrane Solutions
micro ghp membrane filter maximum operating temperature 55 C PRODUCT DATA SHEET – Microsoll 225 psi (1.55 MPa) Applied Pressure 77 °F (25 °C) Operating Temperature 15% Permeate Recovery 6,5 – 7.0 pH Range Permeate flow: 2.250 GPD (8,5m3/d) Salt R