Maximum Operating Temperature (Metric) 55°C. Typical Flow Rate. 215 mL/min at 2.1 bar (210 kPa, 30 psi) 25 mm Standard Acrodisc Syringe Filters. Type.
Jun 13, 2015 · Plastic FILM [ Plastic Film Capacitors Manufacturers] Mylar: has a wide temperature change of 20% over -55 to +125C. Moisture absorption is half that of paper. Mylar is the same as polyester. The term Mylar is a trade name. Polycarbonate: Out performs Mylar in all areas. Low Power factor, works best with AC.
For example, the operating pressure for 6” Schedule 80 CPVC pipe is 280 psi. If the operating temperature is 140° F, the maximum operating pressure is now 140 psi (280 x .50). Maximum Operating Temperatures For Various Piping Systems (de-rate operating pressure at temperatures in excess of 73°F) Piping Max. Operating System Temp. °F ABS140
ACRODISC PLASTIC SYRINGE Filters 13mm GHP Membrane 0.20µm Pore Size 75/PK 4454T - $177.71. FOR SALE! New Old Stock. 75/Pack. $5 Maximum Shipping Rate on All Domestic Orders! 232798026944
Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance
Leakage Current 0.75 mA maximum at 250 V/60 Hz Input/Output Terminal Type PCB mount Operating Temperature Range −25°C to +55°C (not including self temperature rise) Table 1 – Ratings & Part Number Reference Part Number Phase Rated Voltage AC/DC (V) Rated Current AC/DC (A) Leakage Current at 250 V/60 Hz (mA) Maximum Temperature Rise (K
Operating temperature -55°C to +125°C Operating temperature1-55°C to +70°C Storage temperature -55°C to +125°C For Notes to Electrical Performance Characteristics, refer to page 5 1 Meets de-rating per MIL-STD-975 Electrical Performance Characteristics Parameter Group A Subgroup V Conditions-55°C TC +85°C IN = 28V DC ± 5%, CL= 0 unless
Maximum Operating Pressure: 5.2 bar (520 kPa, 75 psi) Maximum Operating Temperature: 55 oC (131 oF) Authorized Signature: Name: Mike Wise Title: Senior Quality Assurance Manager Date: 14th November 2019
This durable part has a power rating of 2 W. This product is 36.52 mm long, 36.12 mm tall and 27.78 mm deep. The RV4NAYSD103A part has a solder lug termination style. This device is made with conductive plastic technology. This part has an operating temperature of -55 to 120 °C. It has a tolerance of 10%. A datasheet is only available for this
Voir et télécharger Pall Acrodisc guide d'utilisation rapide en ligne. Acrodisc équipement de laboratoire téléchargement de manuel pdf
Polypropylene GxF Maximum Operating Pressure (bar) 6.2 bar Maximum Operating Temperature (Metric) 55 C° Replacement for AP-4305 Typical Flow Rate 112 mL/min at 1.0 bar (100 kPa, 15 psi) Overview Description Type Use Documents Datasheets Download: English Description
PALL AP-4560 Acrodisc PSF Syringe Filter with GHP Membrane, 0.45 µm Pore Size, 25 mm Diameter, 50/Package, 200/Case 55°C Maximum Operating Temperature At 2.1 Bar
Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) GF/0.45µm is 6.3 bar (90 psi) Typical Water Flow Rate (mL/min at 2.1 bar (30psi)) 0.2µm, 25mm is 60 0.45µm, 25mm is 65 0.45µm, 25mm GF is 60: Typical Water Flow Rate (mL/min at 0.7 bar (10psi)) 0.2µm, 13mm is 17 0.45µm, 13mm is 28
Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs. Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either
Maximum Short Time Operating Temperature - for pipes without pressure. PVC : 95 o C; PP : 100 o C; PE : 95 o C ; Heat Distortion Temperature - is the temperature where a test piece of a material placed in a heat medium with a bending load (18.6 kg/cm 2) applied - reaches a specified deflection. ABS: 104 - 106 o C; PVC: 54 - 80 o C; HDPE: 43