Now:$107.09(You save ) Inoculation Loop, Flexible, 1uL, Calibration Certificate, Sterile, PS, 10/Zip Lock Bag, 100 Bags/Unit. disposable inoculation loops and needles offer the most convenient and safest way of streaking culture media. These polystyrene (PS) inoculation loops are smooth and flexible to facilitate uniform streaking of culture media.
HPLC Mobile Phase Filtration Membranes, 47 mm 66557 0.2 µm, GH Polypro (PP) membrane 100/pkg NA 0 66548 0.45 µm, GH Polypro (PP) membrane 100/pkg NA 0 66143 0.2 µm, TF (PTFE) membrane 100/pkg NA 0 66149 0.45 µm, TF (PTFE) membrane 100/pkg NA 0 66477 0.2 µm, FP Vericel (PVDF) membrane 100/pkg NA 0
The wwPTFE membrane is ideal for sample preparation and solvent filtration. Extend column life up to 52x. Improve result quality with up to 24% less filter extractables and lower adsorption. Use one membrane filter type for all your sample preparation applications. Hydrophilic wwPTFE membrane also available in two LCMS-certified configurations.
Membrane material includes PES and PVDF in .22µm and .45µm. Our flasks have a wide bottle opening for easy access and pouring of your samples, and the funnel is manufactured from optically clear polystyrene. The bottle and filter adapter are manufactured from 100% virgin polypropylene. . Related Products: Vacuum Flask.
Puradisc™ 25 Syringe Filters. Cytiva. Quick and efficient sample filtration HPLC sample preparation Sterile isolation Autoclavable at 121°C Puradisc 25 is a 25 mm diameter syringe filter for sample volume throughput up to 100 mL . Low hold volumes of <100 µL allow for maximum sample recovery.
Inoculating Loops 10ul, 25/Sterile Zip Lock Bag, 1000/cs is available to buy in increments of 1. Details. These sterile disposable plastic loops are flexible enough for streaking plates yet rigid enough for subsurface inoculation. The Unique hexagonal shape of the shaft makes the loop easier to grip and guide through a smooth streaking process.
66557 GH Polypro (hydrophilic Recommended for use with organics 0.2 µm 100/pkg polypropylene), 47 mm and aqueous liquids 66548 GH Polypro (hydrophilic Recommended for use with organics 0.45 µm 100/pkg polypropylene), 47 mm and aqueous liquids 66143 TF-200 (PTFE), 47 mm Recommended for use with all organic liquids 0.2 µm 100/pkg
The Membrane Solutions Life Sciences membranes that bound the lowest amount of labeled protein were GH Polypro (GHP) membranes. These membranes are extremely passive membranes developed for low-volume analytical sample preparations where added extractables or sample loss due to binding is unacceptable.
Available in 10, 200, 1000ul and 1250µl sizes. They are made from 100% pure polypropylene plastic and are low-retention leaving less fluid in the tip following ejection. The tips are ultra-clear and graduated. They are packaged Rnase/Dnase and pyrogen free so you can be confident your sample results will not contain any unwanted contaminates.
In air displacement pipettes, a certain volume of air remains between the piston and the liquid. Aspirate - to draw up the sample. Blow-out - to empty the tip completely. Calibration check - checking the difference between the dispensed volume and the selected volume. Dispense - to deliver the sample.
Nest syringe filters have pore size either 0.22μm or 0.45μm, and diameter 13mm or 25mm, with membrane materials either with PES or PVDF membranes. For sample volumes of 2mL to 100mL Retention volume <115µL Maximum operating temperature: 100°C autoclave at 125°C
The permeability and solubility of gases and liquids in a polymer can be very different for different polymers and permeants. In general, permeability and solubility at a given temperature depend on the degree of crystallinity (morphology), the molecular weight, the type of permeant and its concentration or pressure, and in the case of copolymers, also on the composition.
card sample collection 1 spot framed 1800 pcs (36 inner units of 50 cards each) stand for pipette repeate 411sar syringe repeater pipette volume 10 - 100 µl yellow headband tld / eye with ptfe insert - 1 pocket for dosimetry. dosimeter element extremity xd-100, tld-100, 100 mg/square cm
Ground/Polished Rods - We can produce rods which can be processed in high borosilicate, quartz and other glasses from 0.5mm up to 60mm in diameter. Ground and Polished Tubing - We offer precision ID with precision OD tubing, concentric to internal axis. Our tubing is available in precision bore to high precision tolerance of ± 0.01mm and can
10 20 100 200 1000 1250ul Sterile Plastic Disposable Micro Pipette Tips , Find Complete Details about 10 20 100 200 1000 1250ul Sterile Plastic Disposable Micro Pipette Tips,Pipette Tips 100ul,Pipette Tip 1250 Ul,1250 Ul Pipette Tips from Pipette Supplier or Manufacturer-Chongqing New World Trading Co., Ltd.