PALL AP-4560 Acrodisc PSF Syringe Filter with GHP Membrane, 0.45 µm Pore Size, 25 mm Diameter, 50/Package, 200/Case 55°C Maximum Operating Temperature At 2.1 ...
Absolute Maximum Ratings Recommended Operating Conditions Input Voltage -0.5VDC to +160VDC Input Voltage +95VDC to +140VDC Output power Internally limited Output power 0 to Max. Rated Lead Temperature +300°C for 10 seconds Operating temperature -55°C to +85°C
Female luer lock inlet, male slip luer outlet; Membrane Bed Volume. 0.12 mL; Maximum Operating Temperature and Pressure. 2.1 bar (210 kPa, 30 psi) at 60 °C (140 °F) or 5.5 bar (550 kPa, 80 psi) at 21 - 24 °C (70 - 75 °F) Typical
Maximum Operating Pressure 58 psig @ 77°F (4 bar @ 25°C) Maximum DiFerential Pressure 28 psid @ 77°F (1.9 bar @ 25°C) Maximum Operating Temperature 104°F (40°C) Absolute Removal Ratings (nm) 5, 10, 20, 50, and 100 5, 10 10, 40 Filter Cartridge Integrity All Filters are Tested prior to release
Maximum Operating Temperature. 55 °C (131 °F) Minimum Bubble Point - IPA. 0.2 µm: 1 bar (100 kPa, 14.5 psi) 0.45 µm: 0.63 bar (63 kPa, 9.1 psi)
low protein binding membrane ghp syringe filter maximum operating pressure 2.1 bar Supor® EKV Membrane Filters – Membrane Filters – Pall Maximum Operating Temperature * 60 ºC (140 ºF) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure* 5.4 bar (540 kPa, 80 psi) a
Operating temperature -55°C to +125°C Operating temperature1-55°C to +70°C Storage temperature -55°C to +125°C For Notes to Electrical Performance Characteristics, refer to page 5 1 Meets de-rating per MIL-STD-975 Electrical Performance Characteristics Parameter Group A Subgroup V Conditions-55°C TC +85°C IN = 28V DC ± 5%, CL= 0 unless
Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance
Hold-Up Maximum Maximum Typical Part Pore Volume Operating Operating Water Number Description Size (w/air purge) Temperature Pressure Flow Rate AP-4305 GxF/GHP 0.2 µm < 200 µL 55 °C (131 °F) at 2.1 bar 4.1 bar (410 kPa, 60 psi) 175 mL/min at 2.1 bar AP-4307 (210 kPa, 30 psi) at 21-24 °C (70-75 °F) (210 kPa, 30 psi) AP-4306
Maximum Sample Volume: 500 µL Final Concentrate Volume: 15 µL Filtrate Receiver Volume: 500 µL Hold-up Volume (membrane/support): < 5 µL Operating Temperature Range 0 - 40 °C (32 - 104 °F) pH Range Nanosep Devices: 1 - 14 Nanosep MF Devices: 3 - 14 Maximum Centrifugal Force 14,000 x g Centrifuge Fits rotors that accept 1.5 mL tubes
Compatible filter for both aqueous solutions and aggressive organic solvent solutions. Low protein binding. HPLC certified for low levels of UV-absorbing extractables. Maximum operating temperature 55°C (131°F).
ghp membrane maximum operating temperature 55 C Operating temperature effects on the plasticization of The optimum operating conditions for this membrane are 4.5 bar and 25°C. Under these conditions, the selectivities of N2/CH4, CO2/CH4, O2/N2
47mm ghp acrodisc maximum operating pressure 2.1 bar Acrodisc wwPTFE Syringe Filters | Pall- MG Scientific Acrodisc® Syringe Filter with wwPTFE membrane & wwPTFE Membrane Disc Filters, Pall. Avoid the expense and inconvenience of keeping a varie
Maximum Operating Temperature 25 mm PSF: 55 C (131 F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 mm: 6.3 bar (630 kPa, 90 psi) 25 mm PSF: 4.1 bar (410 kPa, 60 psi) at 21 - 24 C (70 - 75 F); 2.1 bar (210 kPa, 30 psi) at 55 C (131 F) Typical Water Flow Rate
Maximum Operating Temperature 55 °C (131 °F) Maximum Operating Pressure 6.2 bar (620 kPa, 90 psi) Typical Water Flow Rate 60 mL/min at 2.1 bar (210 kPa, 30 psi) Endotoxin < 0.25 EU/mL using Limulus Amebocyte Lysate (LAL) test Sterilization Sterilized by ethylene oxide and individually blister packed. Instructions for Use 1. Get Price