The maximum recommended operating temperature for the syringe filters when used with compatible fluids is 60°C. When operating at high temperatures, the housing strength is reduced and it may be necessary to limit the applied pressure.
Acrodisc 25mm Premium Syringe Filter Polypropylene housing. 0.45um GHP hydrophilic polypropylene membrane for maximum chemical compatibility fast flow rates low protein binding low levels of UV-absorbing extractables.
PALL AP-4560 Acrodisc PSF Syringe Filter with GHP Membrane, 0.45 µm Pore Size, 25 mm Diameter, 50/Package, 200/Case 55°C Maximum Operating Temperature At 2.1 ...
Especially 0.22um pore size CA Sterile Syringe Filter excellently suited for sterilization aqueous solutions, buffers, sera and media. Low protein binding to minimize sample loss. PES (polyethersulphone)resistant to a wide range of solvents and offers low binding to proteins and nucleic acid. PES is also recommended for ion chromatography.
Maximum Operating Temperature 55 °C (131 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 mm: 6.9 bar (690 kPa, 100 psi) 17 mm: 130 psi 25 mm: 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF); 2.1 bar (210 kPa, 30 psi) at 55 ºC (131 ºF) Typical Water Flow Rate with Nylon membrane- mL/min at 2.1 bar (210 kPa, 30 psi)
Nest syringe filters have pore size either 0.22µm or 0.45µm, and diameter 13mm or 25mm, with membrane materials either with PES or PVDF membranes. For sample volumes of 2mL to 100mL. Retention volume <115µL. Maximum operating temperature: 100°C autoclave at 125°C for 15 min. Maximum operating pressure approximately 100 ps.
<55: Sample volume (ml) <12 <100 <140: Maximum Operating Temperature: 80°C: 80°C: 80°C: Maximum Operating Pressure (psi) syringe filters, chromatography vials ...
Maximum Operating Temperature 25 mm PSF GxF: 100 ºC (212 ºF) at 2.1 bar (210 kPa, 30 psi) 32 mm: 55 °C (131 °F) Maximum Operating Pressure 25 mm PSF GxF: 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF); 2.1 bar (210 kPa, 30 psi) at 100 ºC (212 ºF) 32 mm: 5.2 bar (520 kPa, 75 psi) Typical Water Flow Rate
1 If the syringe termination is a cemented needle or luer tip cemented needle then the maximum temperature is 50 °C. Syringes for Higher Education For over 60 years Hamilton has been committed to supporting academic research and innovation with syringe grants and special discounts.
Pall® 4558 Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 µm, Diameter 25 mm, Pack of 1000 . Filter Media: Glass Fiber / GH Polypro membrane (GHP, hydrophilic polypropylene)
Withstands up to 75psi. 55[degree]C maximum. Nonpyrogenic. Individually wrapped. Sterile. 50/pk. 1.5. 4189. Acrodisc Syringe Filter with Versapor Membrane 0.8um pore size. 25mm diameter. Cell cultures other biological applications. Luer-Lok design. Large-pore Versapor acrylic copolymer membrane. Withstands 75psi. 55[degree]C maximum. Nonpyrogenic.
Lead Temperature +300°C for 10 seconds Operating temperature -55°C to +85°C Operating temperature -55°C to +125°C Operating temperature1-55°C to +70°C Storage temperature -55°C to +125°C For Notes to Electrical Performance Characteristics, refer to page 5 1 For operation at +125°C, see table, note13
Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) GF/0.45µm is 6.3 bar (90 psi) Typical Water Flow Rate (mL/min at 2.1 bar (30psi)) 0.2µm, 25mm is 60 0.45µm, 25mm is 65 0.45µm, 25mm GF is 60: Typical Water Flow Rate (mL/min at 0.7 bar (10psi)) 0.2µm, 13mm is 17 0.45µm, 13mm is 28 See full list on mgscientific.com
All our syringe filters are HPLC certified. Housing Material: Polypropylene; Effective Filtration Area (cm2): 1.09; Pore Size (µm): 0.45 µm; Holdup Volume (µl): 25 Sample Volume (mL): 10 Inlet Connection: Female luer lock; Outlet Connection: Male luer slip; Maximum Operating Temperature: 50°C; Maximum Operating Pressure: 87 psi (6.0 bar) at
Maximum Operating Temperature : 180°C : 180°C : 180°C : Maximum Operating Pressure (psi) >87 >87 >87 : Applicable pH value : syringe filters, chromatography ...