Gas filtration & Purification - Pall Corporation. Operating Conditions. Maximum Operating Pressure: 2200 psig / 152 bar; Maximum operating temperature: 100 °C / 212 °F (INP, SIP, FCP, SF6P) 40 °C / 104 °F (GEH4P, OXP, CLXP, HCLP, HBRP, CDAP) EU Pressure Equipment Directive: Assemblies have been evaluated and are CE marked per the European Union's Pressure Equipment Directive 2014/68/EU.
Maximum Operating Pressure 58 psig @ 77°F (4 bar @ 25°C) Maximum DiFerential Pressure 28 psid @ 77°F (1.9 bar @ 25°C) Maximum Operating Temperature 104°F (40°C) Absolute Removal Ratings (nm) 5, 10, 20, 50, and 100 5, 10 10, 40 Filter Cartridge Integrity All Filters are Tested prior to release
Acrodisc Syringe Filters with GHP Membrane 55 C (131 F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 ... Filter Holder Stainless Steel Forceps ...
Maximum Operating Temperature. 85°C . Maximum Differential Pressure. 2.8 Bar , 65°C . Maximum Differential Pressure . 2.1 Bar , 21°C . Flow of Single Cartridge(m³/h) 3.9 - 4.5 . Backwashing Flow . In the 1.36 - 2.10 Bar pressure, Backwashing Flow of single cartridge is 0.45 - 0.68m³/h. Backwashing Air Flow . In the 1.36-2.10 Bar pressure,
AP-4357 GHP 0.45 µm < 125 µL 55 °C (131 °F) at 2.1 bar 4.1 bar (410 kPa, 60 psi) 300 mL/min at 2.1 bar AP-4560 (210 kPa, 30 psi) at 21-24 °C (70-75 °F) (210 kPa, 30 psi) AP-4562
Pall® 4558 Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 µm, Diameter 25 mm, Pack of 1000 . Filter Media: Glass Fiber / GH Polypro membrane (GHP, hydrophilic polypropylene)
Acrodisc® Syringe Filters with GHP Membrane - Acrodisc® Syringe Filters at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure. 13 mm: 6.3 bar (630 kPa, 90 psi Acrodisc wwPTFE Syringe Filters | Pall- MG Scientific
31 bar (450 psig) S12N0050R, SI2N0100B, SI2N0200B, SI2N0200R Maximum forward/reverse differential pressure: 5.2 bar (75 psid) Maximum operating temperature in inert gases: 200°C (392°F) Particle retention Greater than 99.9999999% (9 LRV) removal of all particles at maximum rated flow (referenced at the most penetrating particle size)
PVDF Syringe Filters, ACRODISC 13mm Mini w/ 0.2µm PVDF 100pkPVDF Syringe FiltersNon-Sterile Syringe Filters
Patented dispense system for precise one-component micro-dispensing. 100 psi (0.7 MPa, 7 bar) Maximum Air Working Pressure 60 psi (0.4 MPa, 4 bar) Maximum Air Working Pressure: Syringe Feed 60 psi (0.4 MPa, 4 bar) Maximum Material Inlet Pressure Important Safety Instructions Read all warnings and instructions in this manual. Save these
Flow rate: 78mL/min at 2.1 bar. 1.66. $229.17. 4907. Acrodisc Sterile Syringe Filter with 0.2um Fluorodyne II Membrane Membrane is hydrophilic polyvinylidene fluoride. For scale up. Polypropylene. Bacterial retention tested. Integrity testable. Filtration area: 2.8cm2. Female Luer-Lok inlet/male slip luer outlet. Flow rate: 130mL/min at 2.1 bar
In-line filter Maximum operating pressure: 40 bar. For DN80 flanges 16 bar. this filter is maximum 0.5 bar. ... GA1-30 150 106 32 G¾ 12 70 180 3 50 24 95 9 44 20 ...
The premium Titan3 syringe filter range provides even higher levels of confidence • Color coding for easy identification and selection of the correct membrane and pore size • 30 mm products pressure rated to 120 psi/15 bar • Integrated prefilter options for enhanced removal of particulates Both Titan3 and Target2 syringe filters
Diameter 25 mm Filtration Area 3.9 cm² Filter Media Hydrophobic PTFE Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi) Hold-Up Volume <125 µL Housings Polypropylene Maximum Operating Pressure 2.1 bar Max.
Accurate pore size rating – Acrodisc PSF syringe filters are more retentive than standard 25 mm devices and are available with single-layer membranes or multilayer glass fiber prefilters.