5 25 mm filters have HDPE housings with a male Luer slip outlet. 33 mm filters have polypropylene housings with a male Luer slip outlet. Pore Size Process Hold-up Volume Outlet (ìm) Type Volume (after air purge) Connection Qty/Pk Catalogue No. 25 mm Diameter Millipore LCR (Hydrophilic PTFE) Membrane 0.20 LCR 100 mL <100 ìL Male Luer slip 50 SLLGH25NS 250 SLLGH25NB 1000 SLLGH25NK 0.45 LCR 100
Connections (Inlet/Outlet): Max Operating Pressure(psi): Max Operating Temperature(℃): Layers: Female Luer Lock inlet and Male Luer slip outlet 87 100 1 0.92 <10 <10 2.98 <100 <50 PP * SFPTFE013022NBGCU=ChrompureTM Hydrophobic PTFE syringe filter,13mm,0.22um, glass fiber prefilter, non-sterile.
• Lower hold-up volume - due to an improved flow channel design and reduced spacing between the supports within the housing, for better handling of small sample volumes or costly samples • Increased operating pressure - up to 130 psi due to the over-mold that prevents sample leaking at the seam and keeps the filter unit from bursting in half
Description: of a minispike outlet, rather than the traditional male luer outlet. The minispike outlet, available on 13 mm PTFE, Nylon, GH Polypro and PVDF Acrodisc® syringe filters, allows for easy dispensing into autosampler vials. Membrane Design Membrane Type (PTFE, GHP, PVDF. Configuration: Filter Element & Housing Assembly
Filter Media: Versapor membrane (acrylic copolymer on a non-woven support) Housing: Polypropylene Pore Size 0.45, 0.8, and 10 µm Effective Filtration Area 4 mm: 0.2 cm2 13 mm: 1.0 cm2 25 mm PSF: 3.9 cm2 Inlet/Outlet Connections Female luer lock inlet, male slip luer outlet Typical Hold-Up Volume (with air purge) 4 mm: < 7.5 µL 13 mm: < 28 µL
-Choice of media -Polypropylene housing -Luer-lock inlet Polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections Typical hold-up volume: < - 100L. Note: PVDF membrane is not for use with acetone, DMF, DMSO, or bases > - 6N. All membranes are HPLC certified for low levels of UV-absorbing extractables.
Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs. Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either
4219. Acrodisc Syringe Filter 25mm 0.45um. Hydrophobic PTFE membrane for exceptional chemical and temperature compatibility. HPLC certified for low level UV-absorbing extractables. Polypropylene housing. Female Luer-Lok inlet standard male slip Luer outlet. \<100uL hold-up volume. 50/pk. 200/cs.
EZFlow® High Particulate Syringe Filters. membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in 0.2µm or 0.45µm pore sizes. The filter membrane is reinforced with a polypropylene housing with a female Luer-Lok inlet and a male Luer Slip outlet.
FLL = Female Luer-Lok™ outlet, FLS = Female Luer slip, MLL = Male Luer-Lok™ outlet, MLS = Male Luer slip, SHB = Stepped Hose Barb Continued on reverse Membrane Pore size (µm) Diameter (mm) Process Volume (hold-up) Housing and Sterilization method Vented Inlet 50 units/pk 100 units/pk 250 units/pk 1000 units/pk PVDF Durapore® Membrane
Membrane Material: Cellulose Acetate, Nylon, PES, Nitrocellulose, Regenerated Cellulose, PVDF, PTFE and PE, Glass Fiber Membrane Diameter: 25mm and Housing Diameter: 18mm Multifunctional Syringe Filters: equipped with luer-lock or luer-slip male connections for different applications
Acrodisc Syringe Filter 25mm 0.2um. GHP (hydrophilic polypropylene) membrane for low protein binding. HPLC certified for low level UV-absorbing extractables. Polypropylene housing. Female Luer-Lok inlet standard male slip Luer outlet. \100uL hold-up volume. 1000/pk.
Pall Acrodisc Syringe Filters polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections. All Pall Acrodisc Syringe Filter membranes are HPLC certified for low levels of UV-absorbing extractables. Typical hold-up volume: <100µL.
Typical hold-up volume: \<100µL. Pall Life Sciences #: 4560. This syringe filter is made with GHP (hydrophilic polypropylene) membrane for low protein binding and features a polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections. The membrane is HPLC certified for low levels of UV-absorbing extractables.
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, Ethylene Oxide, Female Luer Lock, Needle (38 × 1.7 mm), Pack Size 50. Minisart ® Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12.