Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 13 mm. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
All units contain PTFE filter membranes in plastic housings with Luer lock inlet and Luer slip outlet fittings. Units smaller than 25 mm diameter are specifically designed to minimize hold-up in filtration of small volumes. The 3-4 mm units are recommended for volumes of <1 mL; the 13 mm units are recommended for volumes of 0.5-10 mL.
All filters are designed with Female Luer-Lock inlets and Male Luer-Lock outlets. Gamma sterilized, non-pyrogenic and RNA/DNA-Free. Tips on choosing membrane: PVDF (Polyvinylidene fluoride) - extremely low protein-binding; for filtration of non-aggressive aqueous and mild organic solutions, or were maximizing protein recovery is important
and organic-based sample environments • Recommended for HPLC and UHPLC PVDF syringe filters have a well defined pore structure, giving effective retention of particles without excessive pore blockage. Compatible with aqueous and most organic solvents. They are excellent general filters for HPLC and organic solvent sample clean up. Specifications
How to Select a Syringe Filter and How to Use it? (2020 Guide)Feb 17, 2020 · PTFE Hydrophobic Filters Chemical Compatibility Chart >> PTFE Hydrophilic Syringe Filters 0.2 or 0.45
The pore size of your syringe filter is determined by the size of the particles you need to filter out of your aqueous solution. Syringe filters for aqueous solutions are available in these pore sizes: 0.05 µm, 0.10 µm, 0.22 µm, 0.45 µm, 0.70 µm, 0.80 µm, 1 µm, 3 µm, 5 µm, and 10 µm . As a guide, the finer the pore, the more pressure
WINTECH syringe filter units are used for small volume filtration of liquids, gasses and other material-spec ific applications. They are made of extractable free virgin polypropylene housings with luer lock and luer slip fittings. Each filter is sealed to ensure that no adhesives can contaminate the samples, which is essential to maintain the
GD/X sterile syringe filter is designed to support filtration of viscous, hard-to-filter samples with high solids content. Reduces need for multiple syringe filters by processing three to seven times more sample volume than syringe filters without prefilters Female luer lock for leak-free
Nylon Syringe Filters. Excellent Chemical compettibility with esters, bases, and alcohols, naturally hydrophillic. Useful for a wide range of applications, offer board chemical resistance to common solvent. Ideal for use in General Filtration or Medical Assays & HPLC Sample Preparation. High Protein Binding Capacity: Immobilizes Antigens
Acrodisc PSF syringe filters are Zymark and SOTAX Automation Certified to ensure smooth operation and worry-free performance 24 hours a day in automated workstations. Avoid the expense and inconvenience of keeping a variety of filters on hand with a versatile filter for aqueous and aggressive organic solvent-based solutions. Features:
GHP Acrodisc™ has a hydrophilic polypropylene membrane. Will handle both aqueous as well as aggressive organic solvent-based solutions. Available with glass fiber (GF) prefilter for particle laden samples (EF8436C). Nylon Acrodisc™ has a 25 mm HPLC certified nonpyrogenic nylon membrane for analyzing aqueous samples. Non-autoclavable. See full list on daigger.com
64312. Cole-Parmer. Best suited for analytical and research applications and organic solvent filtration. Bidirectional flow with female luer lock on one side and a male luer slip on the other. Withstand pressure up to 100 psi (7 bar) Batch test certificate included with each pack. PTFE Syringe Filters stand up to the most aggressive solvent
Jul 06, 2019 · Syringe Filters with Luer Lock Inlet . Luer lock inlet offers leak-tight syringe connection. Variety of filter types, porosities, and diameters. Color coded for easy identification. Rugged polypropylene housing. Autoclavable to 121 °C for 15 minutes. Quantity break pricing for greater savings.
Syringe Filter, PVDF, 0.10µm, 13mm Diameter. Denville. Denville Scientific Syringe Filters are constructed so that the sample must pass through the membrane, not leak around it. Denville Syringe Filters are easy to use. They may be used with any luer-lock syringe and are color-coded for easy recognition.
• Solutions at temperatures up to 100°C can be fi ltered using Target2 and Titan3 syringe fi lters. • Syringe fi lters can be sterilized by autoclave at 125°C for 15 minutes • The inlet connection is an enhanced female Luer Lock™ fi tting designed for extra security when attached to a Luer Lock syringe