Avoid the expense and inconvenience of keeping a variety of filters on hand with a versatile filter for aqueous and aggressive organic solvent-based solutions. Features: Low protein binding membrane gives high recovery of critical proteinaceous samples. Accurate analysis. HPLC certified for low levels of UV-absorbing extractables.
64312. Cole-Parmer. Best suited for analytical and research applications and organic solvent filtration. Bidirectional flow with female luer lock on one side and a male luer slip on the other. Withstand pressure up to 100 psi (7 bar) Batch test certificate included with each pack. PTFE Syringe Filters stand up to the most aggressive solvent
A double luer lock connection is typically used for applications that need in line filtration for high throughput. Most commonly syringe filters are produced with female luer lock and male luer slip fittings which provide a leak tight connection and can be used for different applications, including liquid filtration.
(hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous and non-aggressive, solvent-based mobile phases. Polypropylene housing with female Luer-Lock inlet and standard male slip Luer outlet connections. All membranes
Whatman Puradisc 25 TF Syringe Filters, Whatman Filters. For effective filtration of solvents, chemicals, non-aqueous solutions, and samples. Ideal for HPLC, TLC, and GC sample clarification, HPLC solvent filtration, sterilization of air/gases, and air/gas filtration. Particularly suited for aggressive chemical-based applications.
The GHP membrane used in Pall Laboratory Acrodisc® syringe filters, centrifugal devices and Acroprep™ filter plates will be discontinued due to the rationalization of a key material from our supplier. However we are excited to announce the launch of the NEW wwPTFE universal membrane as a direct replacement for GHP filtration products.
The GHP membrane is compatible with acids and bases, as well as aggressive organic solvents and halogenated solvents. These unique characteristics of the GHP membrane allow the Acrodisc syringe filter to serve as a universal membrane for use across a wide range of sample prep applications.
• Aqueous/organic solvent recommended Hydrophilic PTFE (PTFE-L) syringe filters are applicable for filtration of gaseous or organic solvent-based samples. The modified membrane exhibits broad chemical resistance and unsurpassed temperature stability to address aggressive sample matrixes and extreme temperature situations.
Gases and Aggressive Organic Solvents Hydrophobic membranes repel water and are inert to aggressive organic solvents, making them ideal for gases and organic solvents. Choose Pall Life Sciences filters with PTFE membrane. Aqueous and Organic-Solvent Solutions Different polymeric membranes have different chemical compatibilities.
Female Luer Lock. Female Luer Lock. Outlet Connection. Male Luer sliding joint. Male Luer sliding joint. Filtration Area. 1.0 cm 2. 2.8 cm 2. Filtration Volume. 1 – 10ml. 10 – 50ml. Dead Volume exclude air. 28ul. 70ul. Operation Pressure. 75 psi. 75 psi
Female luer lock Male luer slip / Gamma Radiation 33 ÍP Ultrasonic welding <120 Female luer lock Male luer slip Enter from INLET Over molding GF* Gamma Radiation Toll free: 866-528-4572 Fax: 1-732-412-4040 Address: 1108 Spring View Lane Plano, TX 75075 Email: info@membrane-solutions.com web: www.membrane-solutions.com
All-purpose, universal hydrophilic polypropylene membrane with maximum chemical compatibility when filtering both aqueous solutions. and aggressive solvents. Low protein binding of GH Polypro membrane provides high recovery of critical proteinaceous samples. HPLC certi-. fied to assure that the filter will not add artifacts to analysis. Diameter.
• Solutions at temperatures up to 100°C can be fi ltered using Target2 and Titan3 syringe fi lters. • Syringe fi lters can be sterilized by autoclave at 125°C for 15 minutes • The inlet connection is an enhanced female Luer Lock™ fi tting designed for extra security when attached to a Luer Lock syringe
GHP Acrodisc™ has a hydrophilic polypropylene membrane. Will handle both aqueous as well as aggressive organic solvent-based solutions. Available with glass fiber (GF) prefilter for particle laden samples (EF8436C). Nylon Acrodisc™ has a 25 mm HPLC certified nonpyrogenic nylon membrane for analyzing aqueous samples. Non-autoclavable.
Versatile filter for aqueous and aggressive organic solvent-based solutions. Haply certified for low levels of UV-absorbing extract ables. Acrodisc syringe filters with ghp membrane, 25mm m 1000 pkg SPF are Mark and so tax automation certified to ensure smooth operation worry-free performance 24 hours a day in automated workstations.