low protein binding membrane ghp syringe filter maximum operating pressure 2.1 bar

Supor® EKV Membrane Filters - Membrane Filters - Pall

Maximum Operating Temperature * 60 ºC (140 ºF) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure* 5.4 bar (540 kPa, 80 psi) at ambient temperature: Recommended Integrity Test Minimum Bubble Point (Water) > 3.32 bar (332 kPa, 48 psi) Bacterial Retention: Lot samples retain a minimum of 10 7 cfu/cm 2 of B. diminuta per modified ASTM F838

Acrodisc® Syringe Filters with GHP Membrane - HPLC/UHPLC

Maximum Operating Temperature. 25 mm PSF: 55 ºC (131 ºF) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure. 13 mm: 6.3 bar (630 kPa, 90 psi) 25 mm PSF: 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF); 2.1 bar (210 kPa, 30 psi) at 55 ºC (131 ºF) Typical Water Flow Rate. mL/min at 0.7 bar (70 kPa, 10 psi) 13 mm, 0.2 µm: 17

Acrodisc® Syringe Filters Optimized for Scale Up - Sterile

Acrodisc® Syringe Filters Optimized and is ideal for solutions where low protein binding is required. ... at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure ...

PES Membrane Filter, PES Membrane - Membrane Solutions

PES (Polyethersulfone) membrane is hydrophilic and constructed from Polyethersulfone polymer membrane. It is designed to remove particulates during general filtration, and its low protein and drug binding characteristics make it ideally suited for life science application. PES Memmbrane Filter.pdf

PALL ACRODISC SYRINGE FILTERS - vgdusa.com

Acrodisc Syringe Filter with 0.2 um Supor Membrane 13 mm filter non-sterile 1000/pkg Disposable syringe filter with low protein binding membrane single use for contaminant removal from most aqueous solutions. Polyethersulfone membrane provides high throughput and fast flow rate. 2.8. $1,443.01 4902

Acrodisc® PSF Syringe Filters

AP-4795 PVDF 0.2 µm < 100 µL 82 °C (180 °F) at 2.1 bar 4.1 bar (410 kPa, 60 psi) 95 mL/min at 2.1 bar AP-4796 (210 kPa, 30 psi) at 21-24 °C (70-75 °F) (210 kPa, 30 psi) AP-4797

Whatman Syringe Filters Syringe Filters

The GHP hydrophilic polypropylene (GH Polypro) membrane is ideal for maximum chemical compatibility, fast flow rates, low protein binding, and low levels of UV-absorbing extractables. The Pall Acrodisc Premium Syringe Filter glass fiber membrane allows for quick and easy filtration for difficult-to-filter aqueous solutions.

Low Protein Binding Syringe Filters - Support

A low protein concentration is easy to filter. However, to avoid binding to filter media or other components, low protein binding syringe filters are required to minimize protein loss during filtration. Protein Binding Characteristics of Syringe Filters The membrane material of the syringe filter dictates how it binds protein.

Supor EKV Membrane Filters - VWR

25 mm Acrodisc ® Syringe Filters Universal life science membrane with low protein binding Maximum Operating Pressure* – 5.4 bar (540 kPa, 80 psi) 4.1 bar (410 ...

PROPOR SG Filters - Parker Hannifin

10¨ (250 mm) filter cartridge. PROPOR SG Filters Protein binding on membrane materials 140 120 100 80 60 40 20 0 Protein Adsorption (mg / cm 2) (ml / min) Nylon Polypropylene Polysulphone PVDF Pdh PES Membrane Material HSA g-globulin Insulin Micron Rating 0.1 0.2 0.45 Filter Cartridges / MURUS / DEMICAP / Syringe FIlters

GH Polypro (GHP) Membrane Disc Filters - Separations

Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance that the filter will not add artifacts to your analysis.

Pall 4558 Acrodisc Syringe Filters with GHP Membrane Pack of

Pall 4558 Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 µm, Diameter 25 mm, Pack of 1000: Industrial & Scientific. Automation Certified to ensure smooth operation and worry-free performance 24 hours a day in automated workstations.

Acrodisc® Syringe Filters with Supor® Membrane

Maximum Operating Temperature 25 mm PSF GxF: 100 ºC (212 ºF) at 2.1 bar (210 kPa, 30 psi) 32 mm: 55 °C (131 °F) Maximum Operating Pressure 25 mm PSF GxF: 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF); 2.1 bar (210 kPa, 30 psi) at 100 ºC (212 ºF) 32 mm: 5.2 bar (520 kPa, 75 psi) Typical Water Flow Rate

PTFE and PVDF Hydrophilic Syringe Filter - membrane-solutions.com

Available Hydrophilic Membrane PVDF PTFE PVDF PTFE PVDF PTFE PVDF PTFE Maximum Operating Temperature(°C) 100 130 100 130 100 130 100 130 Maximum Operating Pressure(bar) 6 3UH ILOWUDWLRQ ÍP 33 ÍP GF* Sterilization option color code process %LRSXUH PC <200 %HSXUH 33 0.22, 0.45 & more 5 PP 33 0.22, 0.45 & more 4.5 <80 Over molding Enter from INLET

Acrodisc wwPTFE Syringe Filters | Pall- MG Scientific

Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) GF/0.45µm is 6.3 bar (90 psi) Typical Water Flow Rate (mL/min at 2.1 bar (30psi)) 0.2µm, 25mm is 60 0.45µm, 25mm is 65 0.45µm, 25mm GF is 60: Typical Water Flow Rate (mL/min at 0.7 bar (10psi)) 0.2µm, 13mm is 17 0.45µm, 13mm is 28 See full list on mgscientific.com