PSH-Series high purity hydrophobic polysulfone membrane filter cartridges provide a cost-effective alternative to PTFE or PVDF membrane cartridges for air, bulk gas, and tank vent applications requiring high moisture resistance. The highly asymmetric membrane pore structure provides high flow rate at low pressure drop.
Pall® 4558 Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 µm, Diameter 25 mm, Pack of 1000 . Maximum Operating Pressure: 2.1 bar;
GH Polypro (GHP) Membrane Disc Filters - Separations. GH Polypro (GHP) Membrane Disc Filters All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min
Hydrophobic membrane filters are typically used with compatible non-aqueous fluids. They are also commonly used as air, gas, or vent filters. Hydrophobic membrane filters are sometimes used with water or aqueous solutions; and, in these applications, they must first be prewet with a low surface tension, water miscible fluid prior to use.
Home » News » GHP Filter » ghp acrodisc maximum operating pressure 2.1 bar ghp acrodisc maximum operating pressure 2.1 bar Acrodisc PSF Syringe Filters – Medigene Sdn. Bhd. high operating pressures to avoid filter burst AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar
Foxx Life Sciences. EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical.
Maximum Operating Temperature: 90 o C (194 o F) Maximum Differential Pressure: 4.8 bar at 20 o C (70 psi at 68 o F) 2.1 bar at 90 o C (30 psi at 194 o F) Recommended Change Out Differential Pressure: 2.4 bar (35 psi)
Nov 08, 2018 · Sterlitech offers a variety of hydrophobic membrane filters, including PTFE and polypropylene. Hydrophilic membrane filters. Sterlitech offers a broad variety of hydrophilic membrane disc and syringe filters, from inorganic silver and ceramic to polymeric nylon and polyethersulfone (PES). The applications for hydrophilic membranes are as varied
Home » News » GHP Filter » Popular GH Polypro membrane maximum operating pressure 2.1 bar Popular GH Polypro membrane maximum operating pressure 2.1 bar Natural Organic Matter Removal and Fouling in a Low Pressure Jan 08, 2014 · The NOM rejection and membrane fouling were performed on commercial polypropylene hollow fiber MF (Zena Membranes
Operating conditions: Normal Operating Temperature: Up to 65℃ (140℉) Max.Operating Temperature.: 90℃ (194℉) at P≤1.0 bar (14psi) Max. Differential Pressure: Normal Flow direction: 4.2 bar (60 psi) at 25℃ (77℉) Reverse flow direction: 2.1 bar (30psi) at 25℃ (77℉). PH Value compatibility: 1-13: Sterilization:
13, 17, 25 & 31mm: Female luer lock inlet, male slip luer outlet Typical Hold-Up Volume (with air purge) 13 mm: . 15 μL 17mm : 18 μL 25 mm: 80 μL 25 mm Prefilter: 80 μL 31 mm: 80 μL Maximum Operating Temperature 55 °C (131 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 mm: 6.9 bar (690 kPa, 100 psi) 17 mm: 130 psi
28139-550CS 894.3 USD. 28139-550 28139-548 28143-264. Acrodisc® Syringe Filters with GHP Membrane, Pall Laboratory. Filters Syringe Filters. Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including syringe filters, filter plates, centrifugal devices and membrane filter discs.
Description of PVDF Membrane Filters. PVDF membrane filter has good heat resistance and chemical stability. PVDF filter can withstand high-pressure steam sterilization at 128-142℃ and can withstand strong acids, aliphatics, aromatics, alcohols, aldehydes, ketones, ethers, and other organic and inorganic solvents. The membrane has stronger
Pall Laboratory. of filter media: hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without pre-wetting; GHP (hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous and non-aggressive,. Compare this item.
These offer high quality filtration for analytical samples. Certified for HPLC to ensure low extractables. Available in a broad range of membranes to meet sample compatibility requirements. The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume.