Filter Media GH Polypro (GHP, hydrophilic polypropylene), TF (PTFE, hydrophobic polytetrafluoroethylene), PVDF (hydrophilic polyvinylidene fluoride), and Nylaflo™ (hydrophilic nylon) membranes Pore Size 0.2 and 0.45 µm Typical Thickness GHP Membrane 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) TF (PTFE) Membrane 0.2 µm: 139 µm
Acrodisc Syringe Filters with GHP Membrane (GHP, hydrophilic polypropylene) ... 55 C (131 F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 mm: 6.3 ...
Maximum Operating Temperature: 13 mm: 55°C (131°F) 25 mm PSF: 100°C (212°F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure: 13 mm: 6.9 bar (690 kPa, 100 psi) 25 mm PSF: 4.1 bar (410 kPa, 60 psi) at 21-24°C (70-75°F); 2.1 bar (210 kPa, 30 psi) at 100°C (212°F) Typical Water Flow Rate: mL/min at 1.0 bar (100 kPa, 15 psi) 13 mm, 0
Accurate pore size rating – Acrodisc PSF syringe filters are more retentive than standard 25 mm devices and are available with single-layer membranes or multilayer glass fiber prefilters.
Maximum differential Pressure (reverse): 2.1 bar (30 Psi) @ 25 oC (77 oF) oMaximum Operating Temperature: 80 C (176 o F) Recommended Replacement Pressure: 2.4 bar (35.3 Psi)
Maximum Operating Pressure 5.4 bar (540 kPa, 80 psi) at ambient temperature Typical Water Flow Rate mL/min at 2.1 bar (210 kPa, 30 psi) PN 4905: 130 PN 4906: 78 PN 4907: 130 PN 4908: 77 Recommended Integrity Test Minimum Bubble Point - Water PN 4905: 3.5 bar (350 kPa, 51 psi) PN 4906, 4908, and 4907: 3.2 bar (320 kPa, 46 psi)
Filter Size: 25 cm²; Effective Filtration Area (Metric): 2.8 cm²; Filter Media: Hydrophilic polyvinylidene fluoride (PVDF) Hold-Up Volume: 100 µL; Housing Material: polypropylene; Maximum Operating Pressure (bar): 2.1 bar; Maximum Operating Temperature (Metric): 82 °C; Quantity: 50 pkg; Typical Flow Rate144 mL/min at 2.1 bar (210 kPa, 30 psi)
Filter Media: Hydrophobic PTFE; Hold-Up Volume: 125 µL Housing Material: Polypropylene; Maximum Operating Pressure (bar): 2.1 bar; Maximum Operating Temperature (Metric): 100 °C; Pore Size (Removal Rating): 0.45 µm; Typical Flow Rate: 510 mL/min at 1.0 bar (100 kPa, 15 psi)
Acrodisc 25mm Premium Syringe Filter Polypropylene housing. GHP hydrophilic polypropylene membrane for maximum chemical compatibility fast flow rates low protein binding and low levels of UV-absorbing extractables. Pore size: 0.45um. Filtration area: 3.9cm2. Hold-up volume: \<125uL. 9. $2,249.72 AP-4564
Burst/Pressure Test Acrodisc syringe filters are tested for resistance to pressure. This test is a quality and safety test to ensure the Acrodisc syringe filter housings will not rupture at their rated operating pressures. The maximum operating pressure listed in the product literature is well below the actual burst pressure.
of Acrodisc PSF syringe filters was collected and run • Available with GHP hydrophilic polypropylene ... AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar ...
Filter Media: GHP (hydrophilic polypropylene), Nylon at 2.1 bar 4.1 bar (410 kPa, 60 psi) 175 mL/min at 2.1 bar ... Hold-Up Maximum Maximum Typical Part Pore ...
Maximum Operating Temperature 55 °C (131 °F) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure 13 mm: 6.9 bar (690 kPa, 100 psi) 17 mm: 130 psi 25 mm: 4.1 bar (410 kPa, 60 psi) at 21 - 24 ºC (70 - 75 ºF); 2.1 bar (210 kPa, 30 psi) at 55 ºC (131 ºF) Typical Water Flow Rate with Nylon membrane- mL/min at 2.1 bar (210 kPa, 30 psi)
Polypropylene syringe filters with a hydrophilic FP Vericel polyvinylidene difluoride (PVDF) membrane that wets out immediately and provides broad chemical and solvent compatibility. Designed to protect HPLC columns and instruments from particulate build-up and help eliminate spurious peaks.
Acrodisc® Syringe Filter with wwPTFE membrane & wwPTFE Membrane Disc Filters, Pall. Avoid the expense and inconvenience of keeping a variety of filters on hand. Versatile filter for aqueous and aggressive organic solvent-based solutions. AutoPack™ packaging is easy to use and the Automation Preferred™ certification assures you of smooth