For reliable concentration and desalting of 50 to 500µL samples with recoveries greater than 90%. Nanosep features low protein-binding Omega membrane (modified polyethersulfone on polyethylene substrate); Nanosep MF is offered with either a Bio-Inert nylon membrane or a GH Polypro (hydrophilic polypropylene) membrane.
Acrodisc® Syringe Filter with HT Tuffryn® Membrane, Pall Laboratory. Suitable for filter sterilizing dilute biological fluids. Low hold-up volume. Less sample loss. Modified acrylic housing. Low hold-up volume minimizes sample loss. Filters 28142-340, 28144-040, and 28144-007 are sterilized by gamma irradiation and individually packaged.
Pure Polypropylene Membrane for Filtration of Aggressive Solvents Pure polypropylene gives high chemical stability Offers high temperature resistance and low extractable levels Pall Laboratory products are designed for laboratory applications only. This product is not approved. Compare this item.
4.1.1 Introduction MUSTANG® ION EXCHANGE MEMBRANES 4.1. high capacity Mustang Q membrane, an anion exchanger with a polyethersulfone Load the sample up to a 2 mL volume onto the column at 1 mL/min flow rate. Sample Preparation. Filter Design and Membrane Choices . No evaporation and reconstitution necessary due to elution volumes as low as
GH Polypro (GHP) Membrane Disc Filters All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min
Pall 4567 Acrodisc Syringe Filters with GH Polypro Membrane . Low protein binding membrane gives high recovery of critical proteinaceous samples. Accurate analysis. HPLC certified for low levels of UV-absorbing extractables. 13 mm Acrodisc syringe filter with minispike configuration offers low hold-up and easy filtration into autosampler vials.
GH Polypro (GHP) Membrane Disc Filters Membrane with Chemical Compatibility for Aqueous Solutions and Aggressive Solvents Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified.
Acrodisc® Syringe Filters for Analytical Sample Preparation - Pall A filter with a low hold-up volume is recommended for use with expensive Our traditional Acrodisc syringe filte Tel: 8618057059123 Email:market@aijirenvial.com
Glass Fiber / GH Polypro membrane (GHP, hydrophilic polypropylene) Hold-Up Volume <200 µL Housing Material polypropylene Maximum Operating Pressure (bar) 4.1 bar Maximum Operating Temperature (Metric) 55 °C Typical Flow Rate 195 mL/min at 2.1 bar (210 kPa, 30 psi) Need help with this product?
polypropylene housing ghp membrane lower hold-up volume to sample analysis (HPLC Upper Housing, Lower Reservoir: Polypropylene Membrane: GH Polypro (h. Uniform testing procedure for analysis of hazardous wastes samples a) Filter the sample through What man GFF (Glass Fibre Filter) with a pore size of 0.6 to 0.8 pm or equivalent.
Hold-Up Volume Another aspect of choosing the right filter size is the hold-up volume. This is the volume of liquid remaining in the filter after use. A filter with a low hold-up volume is recommended for use with expensive fluids or those with limited availability.
GH Polypro (GHP) Membrane Disc Filters All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min
(ideal for use with DMSO-containing solutions), or surfactant-free cellulose acetate membranes in either polypropylene or acrylic copolymer housings. The larger 50 mm diameter disc filter has a PTFE membrane and polypropylene housing with hose barb connectors. This product is ideal for filtering aggressive solvents or gases and applications
Filter volumes as low as 50µL up to 750µL with low hold-up volume Use with any laboratory microcentrifuge Virgin polypropylene filter housing with tapered 2mL, capped receiver tube 10,000xG maximum centrifugal force Related Products: Filtered Microcentrifuge Tubes Compare this item Polypropylene Buchner Funnels Aijiren Tech Nalgene
Certified GH Polypro membrane lower hold-up volume Separation and Purification Sciences Division Hollow fiber hold-up volume, filter change-out times, and total cost-of-ownership for the life of the process.