membrane filter to prevent rapid plugging or use a 2-in-1 filter that has a built-in pre-filter in a single housing. 3. Choose the membrane type based on the solvent that you want to filter. Filter Types All filter inlets are female Luer-compatible, have inert polypropylene or polycarbonate housings and come in four diameters. 30 mm filters
"These syringe filters offer a choice of filter media: hydrophobic PTFE membrane for exceptional chemical and temperature compatibility -hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without prewetting -GHP (hydrophilic polypropylene) membrane for low protein binding -and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous
These tables show five common syringe filter materials -- Cellulose Acetate (CA), Nylon, PES, PTFE, and PVDF -- and their compatibilities with 75 common solvents. Compatibility Tables Compatibility Grades. The tables below indicate a compatibility grade for each material/solvent combination. Safe means that the combination is confirmed compatible.
The GHP membrane used in Pall Laboratory Acrodisc® syringe filters, centrifugal devices and Acroprep™ filter plates will be discontinued due to the rationalization of a key material from our supplier. However we are excited to announce the launch of the NEW wwPTFE universal membrane as a direct replacement for GHP filtration products.
The GHP membrane used in Pall Laboratory Acrodisc® syringe filters, centrifugal devices and Acroprep™ filter plates will be discontinued due to the rationalization of a key material from our supplier. However we are excited to announce the launch of the NEW wwPTFE universal membrane as a direct replacement for GHP filtration products.
Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min/cm2at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20 0.45 µm: 31 Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar
General description. These offer high quality filtration for analytical samples. Certified for HPLC to ensure low extractables. Available in a broad range of membranes to meet sample compatibility requirements. The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume.
The GHP membrane used in Pall Laboratory Acrodisc® syringe filters, centrifugal devices and Acroprep™ filter plates will be discontinued due to the rationalization of a key material from our supplier. However we are excited to announce the launch of the NEW wwPTFE universal membrane as a direct replacement for GHP filtration products.
General description. These offer high quality filtration for analytical samples. Certified for HPLC to ensure low extractables. Available in a broad range of membranes to meet sample compatibility requirements. The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume.
Syringe Filter Housings. 1) Syringe filter housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. 2) Solutions at temperatures up to 100°C can be filtered using syringe filters. 3) Syringe filters can be sterilized by autoclave at 125
Aijiren Technology Corp Acrodisc, Syringe Filter with Glass PreFilter, GHP, 25 mm, 0.45 µm, Aqueous, 50/pk Manufacturer: Aijiren Technology Corp WAT200802 GHP has the broadest chemical compatibility and exhibits minimal protein binding Acrodisc® syringe filters GHP membrane, diam. 25 mm, pore The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL.
Mobile phase filtration is performed prior to placing the solvent into the solvent reservoir. Buffered mobile phase solvents require daily filtration with a 0.2 μm filter to eliminate microbial growth that could increase the baseline. The primary concern when choosing a solvent filter is solvent compatibility with the filter material.
Acrodisc 25mm Premium Syringe Filter Polypropylene housing. GHP hydrophilic polypropylene membrane for maximum chemical compatibility fast flow rates low protein binding and low levels of UV-absorbing extractables. Pore size: 0.2um. Filtration area: 3.9cm2. Hold-up volume: <125uL. Pall 4566 Case of 1,000
EXW price ghp membrane for sale-Lab Consumables Supplier EXW price ghp membrane for sale GHP membrane, diam. 25 mm, pore size 0.45 μm – Sigma-Aldrich Acrodisc® syringe filters GHP membrane, diam. 2
The GHP membrane used in Pall Laboratory Acrodisc® syringe filters, centrifugal devices and Acroprep™ filter plates will be discontinued due to the rationalization of a key material from our supplier. However we are excited to announce the launch of the NEW wwPTFE universal membrane as a direct replacement for GHP filtration products.