Gas filtration & Purification - Pall Corporation. Operating Conditions. Maximum Operating Pressure: 2200 psig / 152 bar; Maximum operating temperature: 100 °C / 212 °F (INP, SIP, FCP, SF6P) 40 °C / 104 °F (GEH4P, OXP, CLXP, HCLP, HBRP, CDAP) EU Pressure Equipment Directive: Assemblies have been evaluated and are CE marked per the European Union's Pressure Equipment Directive 2014/68/EU.
Operating Parameters Maximum Working Pressure: 5.5 bar (80 Psi) @ 25 oC (77 F) oMaximum differential Pressure (forward): 4.1 bar (60 Psi) @ 25 oC (77 F) oMaximum differential Pressure (reverse): 2.1 bar (30 Psi) @ 25 oC (77 F) oMaximum Operating Temperature: 80 C (176 oF) Recommended Replacement Pressure: 2.4 bar (35.3 Psi) Safety
Maximum Operating Pressure 58 psig @ 77°F (4 bar @ 25°C) Maximum DiFerential Pressure 28 psid @ 77°F (1.9 bar @ 25°C) Maximum Operating Temperature 104°F (40°C) Absolute Removal Ratings (nm) 5, 10, 20, 50, and 100 5, 10 10, 40 Filter Cartridge Integrity All Filters are Tested prior to release
Acrodisc Syringe Filters with GHP Membrane. Filter Media: Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) ... (mL/min at 2.1 bar (30psi)) 0.2µm ...
AP-4357 GHP 0.45 µm < 125 µL 55 °C (131 °F) at 2.1 bar 4.1 bar (410 kPa, 60 psi) 300 mL/min at 2.1 bar AP-4560 (210 kPa, 30 psi) at 21-24 °C (70-75 °F) (210 kPa, 30 psi) AP-4562
high operating pressures to avoid filter burst membrane for maximum chemical compatibility, ... AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar ...
Maximum Operating Pressure: 2.1 bar。 Maximum Operating Temperature: °C。 Pall 4558 Acrodisc Syringe Filters with GHP Membrane Pack of 1000 Pore Size 0.45 µm ...
Filter Diameter 37 mm Effective Filtration Area 7.5 cm2 Typical Air Flow Rate 3.6 Lpm @ 0.2 bar (3 psi) Maximum Operating Temperature 100 °C (212 °F) Maximum Operating Pressure 4.1 bar (410 kPa, 60 psi) Minimum Bubble Point (IPA, 100%) 0.9 bar (90 kPa, 13 psi) Minimum Water Breakthrough Pressure 2.1 bar (210 kPa, 30 psi) Dimensions
Operating Parameters Maximum Working Pressure: 5.5 bar (80 Psi) @ 25 oC (77 oF) oMaximum differential Pressure (forward): 4.1 bar (60 Psi) @ 25 oC (77 F) Maximum differential Pressure (reverse): 2.1 bar (30 Psi) @ 25 oC (77 oF) oMaximum Operating Temperature: 80 C (176 oF) Recommended Replacement Pressure: 2.4 bar (35.3 Psi) Safety
Filter Media: Mustang E membrane; Housing: Polypropylene; Pore Size. 0.2 μm; Inlet/Outlet Connections. Female luer lock inlet, male slip luer outlet; Membrane Bed Volume. 0.12 mL; Maximum Operating Temperature and Pressure. 2.1 bar (210 kPa, 30 psi) at 60 °C (140 °F) or 5.5 bar (550 kPa, 80 psi) at 21 - 24 °C (70 - 75 °F) Typical
Acrodisc Syringe Filters with GHP Membrane, Pore Size 0.45 um, Diameter 25 mm, Pack of 1000. $3,235.79 ) (No reviews yet Maximum Operating Pressure: 2.1 bar;
Maximum Operating Temperature 0.8 µm: 55 °C (131 °F) at 2.1 bar (210 kPa, 30 psi) 10 µm: 82 ºC (180 ºF) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure
micropore ghp membrane filter maximum operating pressure 2.1 bar Product Introduction Acrodisc PSF Syringe Filters - Medigene Sdn. Bhd. high operating pressures to avoid filter burst membrane for maximum chemical compatibility, AP-4307 2.1 bar at 21-24 °C (70-75 °F) at 2.1 bar ... GH Series High Pressure Compressed Air Filter (for pressures
Maximum differential Pressure (reverse): 2.1 bar (30 Psi) @ 25 oC (77 F) oMaximum Operating Temperature: 80 C (176 oF) Recommended Replacement Pressure: 2.4 bar (35.3 Psi) Safety Factory Sterilized: Ethylene Oxide Gas (ETO) Product was 100% Integrity Tested and flushed with filtered water @ 0.05 um Regulatory The filters are constructed with
The capacity of the Filter Regulator (FR) can be determined, this will bring to a 1-1/2 25 mm, Acrodisc® Syringe Filter, 0.45 µm - Pall Corporation Maximum Operating Pressure (bar) 2.1 bar 55°C. Typical Flow Rate. 215 mL/min at 2.1 bar (210 kPa, 30 psi) Nylon syringe filters can be used for both aqueous ...