Recommended Flow Rate (LPM) 0.35: 10: Membrane Micron Size: 0.1: 0.8: Membrane Size: MT.61.M1HG: MT.61.M2HG: Membrane Type: Low Flow: High Flow: Material: PTFE: PTFE: Diameter (mm) 61: 61: Thickness (μm) 152: 152: Maximum Temperature (ºF) 300: 300: Recommended Flow Rate (LPM) 2: 15: Membrane Micron Size: 0.1: 0.8: Membrane Size: MT.89.M1G: MT.89.M2G: Membrane Type: Low Flow: High Flow: Material: PTFE: PTFE
Browse Item # GHPT-20, GIANT® Chlorine, Taste & Odor - Replacement Cartridge - 20" (Pack of 1 Filter) in the Porvair Filtration Group catalog including Item #,Item Name,Description,Media,Micron Rating,Length,OD,Maximum Operating Temperature,Flow
A slower flow rate will result in a higher UV dose. The longer the chamber and the longer the water stays in contact with the UV lamp, the higher the dose. UV System manufacturers calculate the dose which can be expected at different flow rates in their system, and provide recommended flow rates that ensure a sufficient dose for disinfection.
Plain nonsterile. Supor hydrophilic polyethersulfone membrane for high flow rate low protein binding low extractables. Stronger than acetate and nitrate membranes. Very high water flow fluid filtration capacity. Autoclavable. 25/pk. Pall Filter 60189. GH Polypro (GHP) Membrane Disc Filters Pore Size: 0.2 um 25 mm. Typical Thickness: 101 um.
Kraken Filter. The Kraken® Filter is a state-of-the-art system utilizing advanced membrane filtration, ensuring a high level of removals for total suspended solids (TSS), phosphorus, nutrients, metals, trash, and hydrocarbons. The Kraken is a membrane filter, which provides high flow rates, while operating at a low loading rate to ensure
Supor hydrophilic polyethersulfone membrane for high flow rate low protein binding low extractables. Stronger than acetate and nitrate membranes. Very high water flow fluid filtration capacity. Autoclavable. 25/pk. $459.80. Pall Filter 60189. GH Polypro (GHP) Membrane Disc Filters Pore Size: 0.2 um 25 mm. Typical Thickness: 101 um.
High Flow Rate Membrane Optimized for Biological, Pharmaceutical, and Sterilizing Filtration Requirements. Fast filtration with superior flow rates and high throughputs. Low protein binding and extensive drug compatibility for critical applications. Saves time and money with fewer filter changes per sample volume.
Description. Syringe Filters with High Flow Rates and Low Protein Binding 0.2 µm, 25 mm (50/pkg). Superior flow rates and higher throughputs than competitive devices., Pall Acrodisc Syringe Filters with Supor Membrane, Sterile Filtration, 25 mm (50/pkg) “Pall Laboratory products are designed for laboratory applications only.
Acrodisc PTFE membrane filter for gasses-PTFE Membrane Filter Description. Syringe Filters with High Flow Rates and Low Protein Binding 0.2 µm, 25 mm (50/pkg).
GH Polypro (GHP) Membrane Disc Filters All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents Specifications Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min/cm 2 at 0.7 bar
GOLD High Pressure Series (GHP-400) Taps Into Your System to Integrate Seamlessly. GHP units tap into high pressure systems, bleeding off a small amount of oil, eliminating the need for external pumps and additional power sources. Sample parts are provided for easy oil sampling.
Flow Rate: Defined as the time required for the flow stream to pass through the filter, flow rate may be measured for air or liquid. Flow rate generally decreases with smaller pore size, but altering membrane material, thickness, porosity, and pore architecture can lead to differences in flow rate.
High Flow Rate Membrane Optimized for Biological, Pharmaceutical, and Sterilizing Filtration Requirements. 47 mm, plain high flow rate membrane disc filter (100/pkg), Supor 200 Membrane Disc Filters - 47 mm, plain (100/pkg) Additional Information: Item Code: 60301; Delivery Time: 4-8 days; Packaging Details: 100/pkg
The GHP hydrophilic polypropylene (GH Polypro) membrane is ideal for maximum chemical compatibility, fast flow rates, low protein binding, and low levels of UV-absorbing extractables. The glass fiber membrane allows for quick and easy filtration for difficult-to-filter aqueous solutions.
In terms of particle retention, filters fall into two categories: surface filters and depth filters. Surface filters, generally referred to as membranes, trap particles exclusively on the top surface. These filters are well suited to samples with low particulate content. However, high particulate content tends to rapidly clog the filter surface.