GHP filters are made of hydrophilic polypropylene, which is supposed to reduce unwanted interactions making them potentially universal filters compared with polypropylene whose surface is known to adsorb MCs. 49 Considering the broad range of cyanotoxins in the present study, analyte recoveries were evaluated using these two materials
EZFlow® High Particulate Syringe Filters. membrane along with a glass fiber pre-filter. The filter membrane is available in PES or Hydrophilic PVDF materials, offered in 0.2µm or 0.45µm pore sizes. The filter membrane is reinforced with a polypropylene housing with a female Luer-Lok inlet and a male Luer Slip outlet.
Shop Pall GH Polypro (GHP) Membrane Disc Filters, Pall Life Sciences 66628, Pack of 100 | Be The First To Review Pall GH Polypro (GHP) Membrane Disc Filters, Pall Life Sciences 66628, Pack of 100 + Free Shipping over $49.
GH Polypro (GHP) Membrane Disc Filters. All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents. Specifications. Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min/cm2at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20 0.45 µm: 31 Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar
Acrodisc® Syringe Filters. Pall Laboratory. of filter media: hydrophilic nylon membrane for excellent chemical compatibility with esters, bases, and alcohols, without pre-wetting; GHP (hydrophilic polypropylene) membrane for low protein binding; and hydrophilic PVDF (polyvinylidine fluoride) membrane for use in aqueous and non-aggressive,.
Acrodisc 25mm Premium Syringe Filter Polypropylene housing. GHP hydrophilic polypropylene membrane for maximum chemical compatibility fast flow rates low protein binding and low levels of UV-absorbing extractables. Pore size: 0.45um. Filtration area: 3.9cm2. Hold-up volume: \<125uL. 9. $2,249.72 AP-4564
GH Polypro (GHP) Filters. All purpose, universal hydrophilic polypropylene membrane with maximum chemical compatibility for filtering both aqueous solutions and aggressive solvents. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified for assurance that the filter will not add artifacts to your
Syringe filters, Acrodisc® GHP. Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including Centrifugal Devices, Syringe Filters, Filter Plates, and Membrane Filter Discs. The GHP membrane used in Pall Laboratory Acrodisc® syringe filters, centrifugal devices and Acroprep
Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm, A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Millex-SV 5.0 µm, A 25 mm diameter sterile syringe filter with a 5 µm pore size hydrophilic PVDF membrane. Comes in a pack of 50.
GH Polypro (GHP) Membrane Disc Filters Pore Size: 0.2 um 25 mm. Typical Thickness: 101 um. Typical Water Flow Rate mL/min/cm2 at 0.7 bar (70 kPa 10 psi): 20. 1.10. $121.77. 66340. GH Polypro (GHP) Membrane Disc Filters Hydrophilic polypropylene membrane with maximum chemical compatibility when filtering both aqueous solutions and aggressive
We offer several filters to accommodate the various types of HPLC solvents. Our GHP (hydrophilic polypropylene) membrane is a universal solvent membrane to reduce confusion with filter selection. Typical solvent filters range in size from 25 to 90 mm in diameter and are available in a 0.2 or 0.45 μm membrane pore size.
Jun 17, 2002 · SmartPor Syringe Filters with GHP Membrane . SmartPor Syringe filter가 고객님의 시료여과에 도움을 드립니다. PVDF : 수용성, 지용성 겸용 . 제품특징 * Materials of Construction Filter Media : GH Polypro (GHP) membrane (hydrophilic polypropylene) Housing : Polypropylene. Pore Size : 0.2 and 0.45 μm. Sample Volume . 13
Safety feature – Filter housing has been designed to withstand high operating pressures to avoid filter burst during use. Versatile – Available with GHP hydrophilic polypropylene membrane for maximum chemical compatibility, fast flow rates, low protein binding, and low levels of UV-absorbing extractables.
Syringe filters, Acrodisc® GHP. Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including Centrifugal Devices, Syringe Filters, Filter Plates, and Membrane Filter Discs. The GHP membrane used in Pall Laboratory Acrodisc® syringe filters, centrifugal devices and Acroprep
Ensuring the correct filtration membrane has been selected from different types of filter materials is often overlooked in routine laboratory sample filtration. Here, we explore different filtration properties and how to take a preventative—rather than reactive—approach, minimizing time spent troubleshooting and maximizing efficiency.