HDPE Geomembrane. High Density Polypropylene, or HDPE Geomembrane is largely used at liquid containment area, acting as a liner to prevent seepage loss and contaminants from entering ground. The applications of This HDPE Geomembrane solves the issue of water seeping in or out from the ground such as agricultural ponds, golf courses, canals
Geomembrane is the low permeable synthetic membrane liner and geotechnical engineering materials which is widely used for solid waste containment, mining and water containment applications. As the leading geomembranes manufacturer, wholesaler, supplier and exporter, The Best Project Material Co., Ltd (BPM Geosynthetics) has been dedicated to
Microporous membrane filter 0.45 μm is made of polypropylene ultrafine fibers by hot melt bonding, which is a kind of membrane material for deep filtration. As a polypropylene membrane filter suppliers , the pp membrane is made of food-grade isotactic polypropylene, without any additives in the whole production process.
For reliable concentration and desalting of 50 to 500µL samples with recoveries greater than 90%. Nanosep features low protein-binding Omega membrane (modified polyethersulfone on polyethylene substrate); Nanosep MF is offered with either a Bio-Inert nylon membrane or a GH Polypro (hydrophilic polypropylene) membrane.
Description. The Poly-Fine II element is a high area, pleated all-polypropylene depth filter frequently used in a wide variety of applications for particle removal. It is a cost-effective choice for final particle removal, or for pre-filtration, including reliable protection of final membrane filters.
GH Polypro (GHP) Membrane Disc Filters, Pall Life Sciences GH POLYPRO .45UM 13MM PK100 : $255.00: 87003-808-PK ... Currently Featured Suppliers; Promotions ...
Ultrafiltration (UF) Membranes. Sterlitech ultrafiltration (UF) flat sheet membranes may be used in our process filtration units for evaluation or for any of your general separations needs. These membranes can be used in conjunction with our ultrafiltration columns to easily perform separations in a variety of cut-offs using positive pressure.
GH Polypro (GHP) Membrane Disc Filters. All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents. Specifications. Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min/cm2at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20 0.45 µm: 31 Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar
The GHP hydrophilic polypropylene (GH Polypro) membrane is ideal for maximum chemical compatibility, fast flow rates, low protein binding, and low levels of UV-absorbing extractables. The glass fiber prefilter allows for quick and easy filtration for difficult-to-filter
Whatman’s range of membrane filters with advanced technical specifications are the preferred choice for a wide range of applications. The membrane filters offer accurately controlled pore size distribution and higher strength and flexibility, which ensure reproducibility and consistency.
PP membrane is made of polypropylene microfiber hot melt adhesive bonding, which belongs to deep filtration. It uses food grade polypropylene as raw materials, without any additives in the whole process of production; it has stable physical and chemical properties and good compatibility; it has various series of pore diameters, high porosity, large capacity to contain pollutants, high
PVDF membrane filter has good heat resistance and chemical stability. PVDF filter can withstand high-pressure steam sterilization at 128-142℃ and can withstand strong acids, aliphatics, aromatics, alcohols, aldehydes, ketones, ethers, and other organic and inorganic solvents. The membrane has stronger corrosion resistance than the PP membrane
Anode Cell Membrane Price - Select 2022 high quality Anode Cell Membrane Price products in best price from certified Chinese Mmo Anode manufacturers, Prebaked Anode suppliers, wholesalers and factory on Made-in-China.com
Most membrane manufacturers recommend CFVs of 5 to 35cm/s for their spiral wound membrane elements. The flat sheet membranes can be operated in this range to simulate use in such elements. Additionally, the flat sheet membranes may be operated outside of this range by users that want to examine the relationship between CVF and fouling and
GHP: GH Polypro membrane (GHP, hydrophilic polypropylene) PTFE: Hydrophobic polytetrafluoroethylene membrane on a polypropylene support Nylon: Hydrophilic nylon membrane ® membrane 2 Solvent Syringe Filters 4 mm 13 and 25 mm Syringe Filters Syringe Filters Syringe Filters Syringe Filters . Membrane Filters - GH Polypro Disc, Pall Gelman - Membrane