-Choice of media -Polypropylene housing -Luer-lock inlet Polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections Typical hold-up volume: < - 100L. Note: PVDF membrane is not for use with acetone, DMF, DMSO, or bases > - 6N. All membranes are HPLC certified for low levels of UV-absorbing extractables.
Adapters, Female Luer Locks, Vacuum. Chemglass. Adapter has a 1/4” -28 thread that accepts a female luer lock adapter which provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes, or syringes with a male luer lock fitting to a standard male taper inner joint. The adapter provides for easier sample concentration.
-Choice of media -Polypropylene housing -Luer-lock inlet Polypropylene housing with female Luer-lock inlet and standard male slip Luer outlet connections Typical hold-up volume: < - 100L. Note: PVDF membrane is not for use with acetone, DMF, DMSO, or bases > - 6N. All membranes are HPLC certified for low levels of UV-absorbing extractables.
Inlet/Outlet Connections. 13 mm: Female luer lok inlet, minispike outlet; 25 mm PSF: Female luer lok inlet, male slip luer outlet; Typical Hold-up Volume(with air purge) 13 mm: < 14 µL; 25 mm PSF: < 125 µL; 25 mm PSF GxF: < 200 µL; Maximum Operating Temperature. 25 mm PSF: 55 ºC (131 ºF) at 2.1 bar (210 kPa, 30 psi) Maximum Operating Pressure
The filter unit has a female Luer-Lok inlet fitting and a male Luer slip outlet fitting for attaching to compatible syringes. The membrane provides reliable, general-purpose filtration of water or other aqueous solutions, and has bi-directional support for filtering forward from a syringe into a container, or backward from a container into a
Syringe Filter 33 mm dia., 200 mL, Yellow, 0.1 µm Pore Size, 145 psi Pressure Rating, Female Luer Lok Inlet Style, Male Luer Slip Outlet Style, 100 µL Hold up Volume, 45°C Temperature, Modified Acrylic Tip, Sterile 100% integrity tested, individually packaged and sterilized Female Luer-Lok™ inlet and male Luer slip outlet
Syringe Filter 33 mm dia., <200 mL, Yellow, 0.1 µm Pore Size, 145 psi Pressure Rating, Female Luer Lok Inlet Style, Male Luer Slip Outlet Style, <100 µL Hold up Volume, 45°C Temperature, Modified Acrylic Tip, Sterile. 100% integrity tested, individually packaged and sterilized. Female Luer-Lok™ inlet and male Luer slip outlet.
Female Luer-Lok inlet and standard male slip Luer outlet. Sterile. Modified acrylic housing. 50/pk. 1.8. $168.32. 4651. Acrodisc Syringe Filter with Supor Membrane Red. 0.1um pore size. 32mm diameter. For biological research. Polyethersulfone membrane provides high throughput and fast flow rate. Female Luer-Lok inlet and standard male slip Luer
Millex filter with easy fill funnel: Description: Female Luer-Lok™ Inlet/Male Luer slip Outlet: Filter Code: GN: Material (Membrane) Nylon (Hydrophilic) Color: Purple: Diameter (Metric) Filter: 33 mm: Material: Polypropylene: Volume (Metric) Hold Up: ≤80 µL after air purge: Max. Inlet Pressure: 8.6 bar (125 psi) Filtration Area: 4.5 cm 2
Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, Ethylene Oxide, Female Luer Lock, Needle (38 × 1.7 mm), Pack Size 50. Minisart ® Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12.
These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the
Connections Female Luer Lok (FLL) inlet and outlet, Female Luer Lok (FLL) filtrate Connections (TC Filter) 1/2” Triclover (TC) inlet and outlet, Female Luer Lok (FLL) filtrate Potting Urethane Process volume 20 - 200 ml Surface area 75 - 610 cm 2. Table 4. Spectrum® MidiKros Hollow Fiber Filter Module specifications
Minispike Acrodisc* 13mm Syringe Filter. 0.2um pore size. GHP hydrophilic polypropylene membrane. Low protein binding. HPLC certified for low UV-absorbing extractables. Polypropylene housing has female Luer-Lok* inlet and minispike outlet.
Membrane made of hydrophobic PTFE, PVDF, MCE, Nylon resistant to almost all aggressive organic solvents, acids and bases. High thermal resistance. Housing: Polypropylene (PP), fuchsia color or as you like color. Inlet:Female Luer lock, Outlet:Male Luer Slip Sterile: yes
GHP - 4566 Membrane 1,000 of Pack - Laboratory Pall 25mm, Filters, Syringe Acrodisc -, Syringe Filters-get the latest - renobeadshop.com