13 mm Polypropylene Housing minispike 13 mm Polypropylene Housing male luer 25 mm Polypropylene Housing male luer Pore Size 0.2 μm 0.45 μm membrane device olumn Particle Sample volume column Particle Sample volume acrodisc 13 mm <=3µm <10mL >3µm <10mL acrodisc 13 mm mini spike <=3µm <10mL >3µm <10mL acrodisc 25 mm <=3µm <10mL >3µm <10mL
Polypropylene membrane filters and prefilters can be safely disposed of by incineration. Unlike PTFE and PVDF filters, the polypropylene filters will not release harmful fluorine compounds. Polypropylene filters have been discontinued as of October 6, 2020; remaining inventory can be found in our Clearance Section.
The GxF multi-layered prefilter provides two to four times the throughput of standard glass fiber prefilter devices for quick and easy filtration of your most difficult-to-filter samples Automation Preferred certification assures you of worry-free performance 24 hours a day in automated workstations Features Specifications Filter Media
Maximum Operating Temperature - 55 °C (131 °F) Minimum Bubble Point - Water - 0.2 μm: 2.9 bar (290 kPa, 42 psi) [66548] GH Polypro (GHP) Membrane Disc Filter 0 GHP-SERIES. Absolute Maximum Ratings Input Voltage -0.5VDC to +120VDC Input Voltage +60VDC to +100VDC Output power Internally limited Output power 0 to Max.
wwPTFE Membrane Disc Filters - Mobile Phase Filtration - Pall Shop Specifications · Filter Media · Pore Size · Typical Thickness · Typical Water Flow RatemL/min/cm2 at 0.7 bar (70 kPa, 10 psi) · Maximum Operating Temperature.
PVDF Membrane 0.2 µm: 140 µm (5.5 mils) 0.45 µm: 127 µm (5.0 mils) Nylaflo Membrane 0.2 and 0.45 µm: 127 µm (5.0 mils) Maximum Operating Temperature GHP Membrane: 55 ºC (131 ºF) PVDF, TF (PTFE), and Nylaflo Membranes: 100 ºC (212 ºF) Minimum Bubble Point – Water GHP Membrane 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138
Discounting ghp membrane filter maximum operating temperature 55 C Acrodisc wwPTFE Syringe Filters | Pall- MG Scientific Acrodisc Syringe Filters with GHP Membrane. Filter Media: Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45
Product Introduction GH Polypro (GHP) Membrane Disc Filters - Separations Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar (290 kPa, 42 psi) 0.45 µm: 1.38 bar (138 kPa, 20 psi) Maximum versatility. Filters aqueous solutions or aggressive chemicals.
Nitrogen (@30°C) 20.52x10-9 in /sec2-atm 0.27x10-10cm2/(sec-cm Hg) Water Absorption @24 h Immersion <0.01% <0.01% Brittleness Temperature Homopolymer 13 – 32 °F -10 – 0 °C Random Copolymer -5 – 20 °F -20 – -5 °C Impact Copolymer - 44 – 20 °F -40 – -5 °C Mechanical Properties
Jan 8, 2023 · All-purpose, universal hydrophilic polypropylene membrane with maximum chemical compatibility when filtering both aqueous solutions and aggressive solvents. Low protein binding of GH Polypro membrane provides high recovery of critical proteinaceous samples. HPLC certified to assure that the filter will not add artifacts to your analysis.
Jan 16, 2020 · The maximum recommended operating temperature for polypropylene is 180°F (82.2°C). Beyond this temperature, the performance values of the material may be compromised. Melting Temperature. At 327°F (163.8°C), polypropylene will melt. This makes polypropylene unsuited to high-temperature applications of any kind.
Pall GHP Polypropylene membrane will be discontinued effective October 31st, 2019. This discontinuation affects devices including Centrifugal Devices, Syringe Filters, Filter Plates, and Membrane Filter Discs.
GH Polypro membrane maximum operating temperature 55 C Application of Membrane Crystallization for - ResearchGate It was also observed that, for the same membrane, increasing the operating temperature from 35 to 55 °C, caused an enhancement of trans-membrane flux (thus decreasing the membranes cost both
UL 746 is the test method generally used to calculate Relative Temperature Index (RTI). RTI is measured in °C. » Learn About Continuous Service Temperature in Detail. Max. Continuous Service Temperature Values of Several Plastics Click to find polymer you are looking for:
Maximum Operating Temperature (Metric) 55 °C Replacement for 66557 Unit of Measure PAC Min Order Qty 1 List Price $ 218.59 Add to Cart Add to Quote wwPTFE 0.45UM 47MM DISC 50/PK Product ID 60548 Removal Rating 0.45 µm Alternate for 66548 Minimum Bubble Point 0.63 bar Maximum Operating Temperature (Metric) 55 °C Replacement for 66548 Unit of Measure