97035-164 4902 Acrodisc Syringe Filter with Supor EKV 50/pkg membrane, 0.2 µm, 25 mm 97035-166 12246 AcroPak 20 Filter with Supor EKV 3/pkg membrane, 0.2 µm, non-sterile 97035-168 12247 AcroPak 20 Filter with Supor EKV 3/pkg membrane, 0.2 µm, sterilized 97035-170 12094 AcroPak 200 Capsule with Supor EKV 3/pkg membrane, 0.2 µm, tapered hose barb
maximum operating pressure. High-proof alcohol solutions and products that do not allow pre-rinsing with water should be circulated for 10 to 20 minutes. Dispose of the rinsing solution after rinsing. Terminate the filtration process once the maximum permitted differential pressure of 43.5 psi (300 kPa, 3 bar) is reached.
Recommended Operating Conditions (for untreated/non-sterile product) Disc (D) Junior (JKP) Mini (MKP) Mid (SKV) Full (L) Maximum Temperature 80 °C 80 °C 80 °C 80 °C 80 °C Maximum Inlet Pressure (at 22 °C) 5.5 bar | 80 psi 5.5 bar | 80 psi 5.5 bar | 80 psi 5.5 bar | 80 psi 5.5 bar | 80 psi Maximum Forward Differential Pressure (at 22 °C)
Core, Cage and Endcaps Polypropylene Code 7 Adapter Polypropylene with encapsulated stainless steel reinforcing ring O-rings Silicone Recommended Operating Differential Pressure 2.1 to 3.1 bard (30 to 45 psid) Maximum Differential Pressure 3.1 bard (45 psid) for continuous service 0.3 bard (4.3 psid) during steam sterilization
Operating Parameters Maximum temperature: 40 °C Maximum pressure: 3.1 bar (45 psi)* Maximum differential pressure: 3.1 bar (45 psi)* * Up to 12 hours at 25 °C; up to 6 hours at 40 °C Sterilization Gamma >25 kGy Shelf Life 3 (three) years Liquid Flow vs. Differential Pressure (Typical) 1.4 – 2.6 mL/min at 2.1 bard, water at 20 °C
Maximum Operating Pressure & Temperature, Liquids Maximum Operating Pressure & Temperature, Gas 75 psig @ 32°F to 100°F 50 psig @ 32°F to 100°F (5,2 bar @ 0°C to 38°C) (3,4 bar @ 0°C to 38°C) 45 psig @ 140°F 30 psig @ 140°F (3,1 bar @ 60°C) (2,1 bar @ 60°C) UltraCap® H.D. Model
VEOLIA/SOLYS/BERKAL Filter/08.19 (190196) www.veoliawatertechnologies.com Maximum Operating Pressure 10 bar Minimum Downstream Pressure 1 bar Maximum Temperature 60°C Recommended Air Quality 270l/min at 6-8 bars Backwash volume without Air 12 l Recommended Air Quality 270l/min at 6-8 bars Maximum recommended Flow rate (m/h)* Empty weight
Maximum Flow Rate: 365 to 4261 (@350 barg) m3/hour, 214 @ 5076 psig to 2507 @ 5076 psig CFM. Maximum Operating Pressure: 350 barg, 5076 psig. Maximum Operating Temperature: 176 or 104 for filters with activated carbon elements °F. Minimum Operating Temperature: 1.5 °C, 34.7 °F.
Filter Membrane Prefilter Layer: Hydrophilic asymmetric PES Final Filter Layer: Hydrophilic PVDF Housing, Vent Plug Polypropylene and Support Material Sealing Technology Insert molding Operating Parameters 1 Maximum Operating 5.4 bar (80 psi) at 20 °C Temperature and Pressure f2.1 bar (30 psi) at 60 °C 1I % ˙&$’ ˇ *!ˆ # ˛˚+ ˝ )- , ( /
Maximum Operating Pressure⁽²⁾ bar 8 Maximum Operating Temperature⁽²⁾ °C 40 (1) Maximum recommended flow rate are worked out for a good quality water. Please ask SOLYS for more information. (2) These values can be increased to either 10 bars or 60° C. Please ask SOLYS for more information. Dimensions & Pipe Connections
filter media, the advanced membrane design provides increased Maximum operating ... 2.1 bar (30 psid) @ 60°C (140°F) Maximum reverse differential pressure:
Jan 31, 2022 · PALL 1119 Polycarbonate in-Line Filter Holder for 47 mm Filter Disc, Non-Sterile, 3.4 bar Maximum Operating Pressure, 5.8 cm Length x 6.4 cm Diameter 4.7 out of 5 stars 3 1 offer from $116.00
Maximum Operating Temperature: 55°C (131°F) Maximum Operating Pressure: 0.2 and 0.45µm is 6.9 bar (100psi) GF/0.45µm is 6.3 bar (90 psi) Typical Water Flow Rate (mL/min at 2.1 bar (30psi)) 0.2µm, 25mm is 60 0.45µm, 25mm is 65 0.45µm, 25mm GF is 60: Typical Water Flow Rate (mL/min at 0.7 bar (10psi)) 0.2µm, 13mm is 17 0.45µm, 13mm is 28
Apr 01, 2021 · 0.21 MPa (2.1 bar; 30 psi) @ 25°C (77°F) Maximum operating pressure. 0.14 MPa (1.4 bar; 20 psi) @ 25°C (77°F) Maximum operating temperature. 70°C (158°F) @ 10 psi. Reference Materials Product Documentation. Published Apr 1, 2021 Data Sheet Astera™ Advanced Liquid Filters. Download PDF.
Gamma PP 45 PSID @ 77°F/25°C (3.1 bar) Minimum burst pressure: PP/HDPE: 120 PSID @ 77° F/25°C (8.3 bar) Gamma PP: 60 PSID @ 77°F/25°C (4.1 bar) Maximum forward differential pressure: 60 PSID (4.1 bar) at 68°F (20°C) Maximum reverse differential pressure: 30 PSID (2.1 bar) at 68°F (20°C) Maximum Operating Temperature: