SPECIFICATION: Pore Size: 0.8/0.2 µm, Filter Size 32 mm, Effective Filtration Area (Metric): 5.8 cm² and Hold-Up Volume <100ul, Maximum Operating Temperature 55 °C and Maximum Operating Pressure 5.2 bar. Housing Material Acrylic and Membrane Material Supor (Hydrophilic polyethersulfone)
Jun 01, 2021 · Temperature Rating. Temperature rating is usually the maximum operating temperature of the resistor. An operating temperature range is often specified: for example, -55°C to +275°C. Thermal Resistance. Thermal resistance is the factor of proportionality between power dissipation and over-temperature and is usually expressed as
Maximum versatility. Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance that the filter will not add artifacts to your analysis. Low API adsorption.
61638 Pall Glass Fiber Filter Type Laboratory Brand New (44.9% similar) 4 cm or 8 x 10in sheets. Dop efficiency is Maximum operating temperature in air: 550 c For gravimetric analysis standard filter binder-free dissolved and suspended solids testing in sanitary water procedures. 00size: 20.
Width: 8.55 cm (3.36 in.) Well Bottom Area 0.05 cm 2 . Maximum Well Volume 100 µL . Recommended Maximum Working Volume 80 µL . Recommended Operating Vacuum 25.4 cm Hg (10 in. Hg) or greater . Filtration by Centrifugation 500 - 3,000 x g . Typical Sample Hold-up Volume < 4 µL per well
New 0.2 μm Acrodisc syringe filters are optimized for UHPLC sample preparation Maximum Operating Temperature: 13 mm: 55°C (131°F) 25 mm PSF: 100°C (212°F) at ...
“Pall Laboratory products are designed for laboratory applications only. Maximum Operating Temperature. 55 °C (131 °F) Minimum Bubble Point - IPA ...
“Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521-1520."
Maximum Operating Temperature and Pressure. 2.1 bar (210 kPa, 30 psi) at 60 °C (140 °F) or 5.5 bar (550 kPa, 80 psi) at 21 - 24 °C (70 - 75 °F) Typical Differential Pressure < 0.07 bar (7 kPa, 1 psi) @ 1 mL/min; Mean Flow Rate. 1 - 4 mL/min; flow rate will vary with type of solutions, concentration of proteins, and other components
Maximum Operating Temperature. Nylon, Nylon GF, PES, and 13 mm PVDF: 55 ˚C (131 ˚F) PTFE, and 25 mm PVDF: 100 ˚C (212 ˚F) ... GHP, PTFE, and 13 mm Nylon: 6.9 ...
Absolute Maximum Ratings Recommended Operating Conditions Input Voltage -0.5VDC to +160VDC Input Voltage +95VDC to +140VDC Output power Internally limited Output power 0 to Max. Rated Lead Temperature +300°C for 10 seconds Operating temperature -55°C to +85°C . RS Pro Cartridge Fuse, F, 2A RS Stock No: 668-6035
General-purpose hydrophilic polypropylene membrane filter for most analytical filtration requirements. Compatible filter for both aqueous solutions and aggressive organic solvent solutions. Low protein binding. HPLC certified for low levels of UV-absorbing extractables. Maximum operating temperature 55°C (131°F). More Information
200 G, 2 ms, half-sine. Operating random vibration. 0.75 grms. Non-operating random vibration. 1.50 grms. Option Kit Contents. HP Elite 45W Thunderbolt 3 Dock, Thunderbolt/AC power cable, 65W A/C.
New 0.2 μm Acrodisc syringe filters are optimized for UHPLC sample preparation Maximum Operating Temperature: 13 mm: 55°C (131°F) 25 mm PSF: 100°C (212°F) at ...
Acrodisc® Syringe Filter with HT Tuffryn® Membrane, Pall Gelman Taylor Scientific 12-4616 12-4616-30 Acrodisc Syringe Filter with HT Tuffryn Membrane, Pall Gelman 4496