Avoid the expense and inconvenience of keeping a variety of filters on hand with a versatile filter for aqueous and aggressive organic solvent-based solutions. Features: Low protein binding membrane gives high recovery of critical proteinaceous samples. Accurate analysis. HPLC certified for low levels of UV-absorbing extractables.
Hydrophobic PTFE syringe filters have broad chemical compatibility, high pH resistance.. They are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The Pure polypropylene housings are color-coded and available in smooth rim or gear rim formats.
solvent filter is the GHP Acrodisc, which includes an all-purpose membrane, GH Polypro (GHP), that is effective for harsh aqueous samples and for aggressive organic solvent-based solutions. The GHP Acrodisc is the most versatile filter available in terms of broad chemical compatibility with bases, acids and organic solvents.
GH Polypro (GHP) Membrane Disc Filters. All purpose, universal membrane with maximum chemical compatibility for both aqueous solutions and aggressive solvents. Specifications. Filter Media Hydrophilic polypropylene Pore Size 0.2 and 0.45 µm Typical Thickness 0.2 µm: 101 µm (4.0 mils) 0.45 µm: 114 µm (4.5 mils) Typical Water Flow Rate mL/min/cm2at 0.7 bar (70 kPa, 10 psi) 0.2 µm: 20 0.45 µm: 31 Maximum Operating Temperature 55 °C (131 °F) Minimum Bubble Point - Water 0.2 µm: 2.9 bar
Tisch Scientific Nylon Membrane Filter, 0.8 µm, 13 mm, Nonsterile, 200 Pack, SF14513 Tisch nylon membrane filters are naturally hydrophilic, have high non-specific binding properties, and an extractable level of 0.0015 mg/cm^2, they are ideal for HPLC solvent and sample preparation.
Part No. Descriptions. Qty/pk. S13NY-022. Nylon syringe filter 13mm 0.22um, yellow. 100. S13NY-045. Nylon syringe filter 13mm 0.45um, white. 100
GHP (hydrophilic polypropylene) membrane is a versatile filter for aqueous and aggressive organic solvent-based solutions. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified for low levels of UV-absorbing extractables. Ideal for filtering samples and HPLC mobile phases. Polypropylene housing.
These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the
<10ml 13mm <100ml 25mm Step 3: Choose the suitable pore size based on the nature of your sample or dirty environmental sample is filtered to ensure the highest syringe filter membrane performance. and mobile phase solutions. For Sterile-filtration, a 0.20 μm porosity filter can be used.
Aug 07, 2018 · Regenerated Cellulose (RC) Membrane. A versatile cellulose-based hydrophilic membrane that is resistant to a very large range of solvents, including aqueous solutions and organic solvents. Recommended for use in HPLC and protein recovery applications. DO USE: with most common solvents, including those used in HPLC.
Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
Effective Filtration Area: 13mm = 1.0cm 2 25mm = 2.8cm 2 25mm Premium = 3.9cm 2: Sample Volume: 13mm is <10mL 25mm is < 100mL 25mm Premium is < 150mL: Inlet/Outlet Connections: 13mm is Female Luer-Lok inlet with minispike outlet. 25mm is Female Luer-Lok inlet with male slip luer outlet: Typical Hold-up Volume (with air purge) 13mm is <14µL 25mm is <100µL See full list on mgscientific.com
Red PTFE (Hydrophilic) Syringe Filters, 0.22 µm, 13 mm. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
The 13 mm size is recommended for samples under 10 mL in volume. The 4 mm size is for samples under 2 mL. PP housing with Luer fittings. GHP - hydrophilic PP membrane suitable for both aqueous and organic samples; GXF - multi-layered glass fiber prefilter; Nylon - general-purpose filter, not for acids and halogenated solvents
Feb 14, 2022 · The Acrodisc premium syringe filters combine the benefits of a multi-layered prefiltration device with an automation-certified filter housing. Avoid the expense and inconvenience of keeping a variety of filters on hand, it is a versatile filter for aqueous and aggressive organic solvent-based solutions. Fixed Price. $ 66.00.