The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume. The 4 mm size is for samples under 2 mL. PP housing with Luer fittings. GHP - hydrophilic PP membrane suitable for both aqueous and organic samples; GXF - multi-layered glass fiber prefilter
The 25 mm Acrodisc is recommended for sample volumes from 5 to 100 mL. The 13 mm size is recommended for samples under 10 mL in volume. The 4 mm size is for samples under 2 mL. PP housing with Luer fittings. GHP - hydrophilic PP membrane suitable for both aqueous and organic samples; GXF - multi-layered glass fiber prefilter
FILTER, SYRINGE, ACRODISC, 13MM GHP MEMBRNE, 1000 EA/CS Acrodisc Syringe Filters by Pall Life Sc Acrodisc® Syringe Filters with GHP Membrane - The "Universal" Membrane Filter for All of Your Analytical Filtration Requirements - Acrodisc PSF syringe filters are Zymark* and SOTAX* Automation Certified to ensure smooth operation and worry-free performance 24 hours a day in automated workstations.
Ideal for filtering samples and HPLC mobile phases. Polypropylene housing. The 13mm fiklter has a female Luer lock inlet and a minispike outlet while the 25mm filter has a female Luer lock inlet and a male slip Luer outlet. The GHP Acrodisc® GF syringe filter version includes a glass fiber prefilter layer for hard-to-filter samples.
13mm GH Polypro membrane effective filtration area 3.9 cm2 Zeta Plus EXT Series Filter cartridges are available in 8″ and 16″ diameters, with surface area ranging from 0.16 m² (1.8 ft²) to 2.77 m² (29.8 ft²) per cartridge.
The GHP membrane used in Pall Laboratory Acrodisc® syringe filters, centrifugal devices and Acroprep™ filter plates will be discontinued due to the rationalization of a key material from our supplier. However we are excited to announce the launch of the NEW wwPTFE universal membrane as a direct replacement for GHP filtration products.
4556 GHP Acrodisc Minispike, 0.45 µm, 13 mm 100/300 4564 GHP Acrodisc, 0.2 µm, 25 mm 50/200 4560 GHP Acrodisc, 0.45 µm, 25 mm 50/200 4559 GHP Acrodisc GF, GF/0.45 µm, 25 mm 50/200 4472 Acrodisc CR PTFE, 0.45 µm, 4 mm 250/750 4552 Acrodisc CR PTFE Minispike, 0.2 µm, 13 mm 100/300 4423 Acrodisc CR PTFE, 0.2 µm, 13 mm 100/300 4553 Acrodisc
25 mm PSF Acrodisc Syringe Filters. Features a large effective filtration area for increased sample throughput, ideal for sample volumes of ≤ 125 mL. Pall’s proprietary membrane technology and accurate pore size ratings offer superior HPLC column protection, helping extend column life by as much as 52 times. Shop Now 25 mm PSF Syringe Filters.
These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the
13 mm Acrodisc syringe filters are designed for the filtration of sample volumes up to 10 mL. They feature an effective filtration area of 1.0 cm 2 and a polypropylene housing which has excellent chemical compatibility properties. The syringe filters are HPLC certified for low levels of UV-absorbing extractables, preventing spurious peaks on
The GHP membrane used in Pall Laboratory Acrodisc® syringe filters, centrifugal devices and Acroprep™ filter plates will be discontinued due to the rationalization of a key material from our supplier. However we are excited to announce the launch of the NEW wwPTFE universal membrane as a direct replacement for GHP filtration products.
EFA (effective filtration area) The total area of the filter media exposed to the flow of liquid or air, that is usable for filtration. This is usually designated in square centimetres (cm2), square inches (in2 ) or square feet (ft2 ). What is an effective filtration area (EFA)? An effective filtration area can be defined as the total area of
13 mm Acrodisc syringe filters are designed for the filtration of sample volumes up to 10 mL. They feature an effective filtration area of 1.0 cm 2 and a polypropylene housing which has excellent chemical compatibility properties. The syringe filters are HPLC certified for low levels of UV-absorbing extractables, preventing spurious peaks on
Filtrate Receiver: Polypropylene. Effective Filtration Area. 0.28 cm2 Provided non-sterile; may be sanitized by filtering 70% with GHP Membrane. Non-Sterile Millex® Syringe Filter Selection Guide - Obrnuta faza. Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE Membrane Male Luer-Slip™. Filtration Area, cm2. 0.1. 0.65. 3.9.
Pall has discountinued in 2021 and when Aijiren Technology inventory depleted, suggests using higher performing, wwPTFE membranes