Filter cartridges are available in 8" and 16" diameters, with surface area ranging from 0.16 m² (1.8 ft²) to 2.77 m² (29.8 ft²) per cartridge. Capsule Construction Zeta Plus EXT series is available in autoclavable and fully disposable BC25 and in Zeta Plus Encapsulated System capsules. With 25 cm² (3.9 in²) of filtration area, the ready-to-
copolymer on a non-woven support) membranes GxF Prefilter: Borosilicate glass Housings: Polypropylene Effective Filtration Area 3.9 cm 2 Sample Volume < 150 mL Inlet/Outlet Connections Female threaded luer inlet, male slip luer outlet AU T OM I N CERTIFIED ® AND Typical Hold-Up Maximum Maximum Typical Part Pore Volume Operating Operating Water
Filter Media : Borosilicate glass fiber Housing : Polypropylene Technical Specification : Filter Rating : 1Aum or 1.6 Aum Effective Filtration Area : 0.8cm2 for 13mm & 3.9 cm2 for 25mm Sample Volume : 20 ml for 13 mm & 150 ml for 25mm Typical Hold Up Volume ( with air purge ) : 20 Aul for 13 mm & 100 Aul for 25mm Maximum Operating
Syringe filter with integrated prefiltration Female Luer-Lok inlet; male slip Luer outlet Flow should enter from the inlet Autoclavable at 121 C (250 F) at 15psi for 20 min. Maximum temperature, 131 C (267 F) Filtration area: 13mm - 1.3cm 2; 25mm - 4.6cm 2
Millipore® membranes have supported laboratory filtration in academic, pharmaceutical, and industrial sectors since the 1950s. We provide a range of membrane chemistries including MF-Millipore® mixed cellulose esters, Durapore® PVDF, Millipore Express® PLUS polyethersulfone, as well as hydrophilic and hydrophobic PTFE.
Effective filtration area: 0.1cm 2 for 4mm, 0.8 cm 2 for 13mm, 3.9 cm 2 for 25mm, & 4.6 cm 2 for 33 mm: Hold up volume <10 μl for 4 mm, < 20 μl for 13 mm, < 50 μl for 25 mm & < 80 µl for 33mm (after air purge) Extractable (NVR) Very low (within limit as specified in USP XXIV) Initial Water flow rate
Specifications Materials of Construction Filter Media: GH Polypro membrane (GHP, hydrophilic polypropylene) Housing: Polypropylene GxF Prefilter: Binder-free borosilicate glass. Pore Size GHP Membrane: 0.2 and 0.45 m Glass Fiber: 1 m GxF Prefilter: 40 - 1 m Effective Filtration Area 13 mm: 1.0 cm2 25 mm PSF: 3.9 cm2
AcroPrep 24 Filter Plates GHP filter plates 0.45 um. Effective Membrane Filtration Area per Well: 0.94 cm2. Filter Plate Diameter: 15.24 cm plate containing 24 wells. Minispike outlet. Maximum Well Volume: 1.9 mL. Recommended Sample Volume: 1.7 mL. Pall Filter 60010. Glass Fiber Filter Type A/E 81mm diameter.
3.9 Cm2 Effective Filtration Area allowing for quick and easy filtration of difficult-to-filter samples.The GHP hydrophilic polypropylene (GH Polypro) membrane is ...
Syringe filter Specifications. Materials of Construction Housing: 100% homopolymer Polypropylene- no filling agents or release agents. Prefilter: Borosilicate glass 1μm Effective Filtration Area 13 mm: 0.8 cm2 17 mm: 1.0 cm2 25 mm: 3.9 cm2 31 mm: 4.5 cm2 Sample Volume 13 mm: < 10 mL 17 mm: < 12 mL 25 mm: < 150 mL 31 mm: < 200 mL Inlet/Outlet
Effective Filtration Area (Metric) 3.9 cm². Filter Media. WWPTFE (water-wettable polytetrafluoroethylene) membrane. Housing Material. HDPE. Typical Flow Rate. 140 mL/min at 30 psi at ambient temperature. Unit of Measure.
PTFE SYRINGE FILTERS - STERILE. Effective filtration area 0.1cm2 for 4mm, 0.8 cm2 for 13mm, 3.9 cm2 for 25mm, & 4.6 cm2 for 33 mm. Initial 40% IPA flow rate 21 ml/min for 0.2 μm & 29.3 ml/min for 0.45 μm (at 10 psi for 25 mm) Applications : • For Analytical and Research applications & for Air sampling. • Used under extreme chemical or temp .
Wettability. Hydrophilic. Effective filtration area. 0.1cm2 for 4mm, 0.8 cm2 for 13mm & 3.9 cm2 for 25mm & 4.6 cm2 for 33mm. Extractable. Very low. To cater the variegated and ever increasing needs and demands of our customers, we are involved in presenting our customers a huge spectrum of Syringe Filters – Nylon.
The wwPTFE membrane is ideal for sample preparation and solvent filtration. Extend column life up to 52x. Improve result quality with up to 24% less filter extractables and lower adsorption. Use one membrane filter type for all your sample preparation applications. Hydrophilic wwPTFE membrane also available in two LCMS-certified configurations.
Membrane material hydrophilic PTFE, hydrophobic PTFE, PVDF, Nylon, CA, MCE, PES, PP, RC Filtration area 0.125cm² Processing sample volume 2 ml Residual volume <10 ul 25mm Syringe Filter Product Housing Material: Medical Polypropylene Filtration area: 3.9 cm² Process Volume: 100 mL Hold-up volume: <100ul Maximun Inlet